|
MESSEINRICHTUNG MIT GASANALYSEGERAET OXYMAT 5M FUER FELDMONTAGE
(0Gr.)
|
|
GASANALYSEGERAET OXYMAT 5F FUER FELDMONTAGE
(37.000Gr.)
|
|
GASWARNGERAET OXYMAT 5F-W FUER FELDMONTAGE
(52.000Gr.)
|
|
EXPLOSIONSGESCHUETZTES GASANALYSEGERAET OXYMAT 5F-EX
(52.000Gr.)
|
|
EXPLOSIONSGESCHUETZTES GASWARNGERAET OXYMAT 5F-W-EX
(52.000Gr.)
|
|
GASANALYSEGERAET OXYMAT 5E, EINSCHUB ZUM EINBAU IN SCHRANK MIT FEINSTAUBFILTER UND DURCHFLUSSANZEIGER, INTERNE GASWEGE SCHLAUCH (VITON)
(21.000Gr.)
|
|
GASANALYSEGERAET OXYMAT 5E, EINSCHUB ZUM EINBAU IN SCHRANK, OHNE FEINSTAUBFILTER UND DURCHFLUSSANZEIGER, INTERNE GASWEGE SCHLAUCH (TEFLON)
(21.000Gr.)
|
|
GASANALYSEGERAET OXYMAT 5E, EINSCHUB ZUM EINBAU IN SCHRANK, INTERNE GASWEGE ROHR, OHNE FEINSTAUBFILTER UND DURCHFLUSSANZEIGER
(21.000Gr.)
|
|
GASWARNGERAET OXYMAT 5E-W, EINSCHUB ZUM EINBAU IN SCHRANK
(21.000Gr.)
|
|
GASANALYSEGERAET OXYMAT 5F, TUEV-GEPRUEFT, FUER FELDMONTAGE
(30.000Gr.)
|
|
GASANALYSEGERAET OXYMAT 5E, TUEV-GEPRUEFT, EINSCHUB ZUM EINBAU IN SCHRANK
(20.000Gr.)
|
|
MESSEINRICHTUNG MIT GASANALYSEGERAET ULTRAMAT 5M
(0Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5F FUER FELDMONTAGE HILFSENERGIE
(32.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5F-EX EXPLOSIONSGESCHUETZT
(51.750Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5E, EINSCHUB ZUM EINBAU IN SCHRANK
(21.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 5 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 10 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 25 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21/O2 MESSKOMPONENTE O2, MESSBEREICHE 0...5%/0...25 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21/O2 MESSSKOMPONENTE O2, MESSBEREICHE 0...10 %/0...25 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21S FUER GERINGE GASMENGEN, 0 BIS 100% CO2, TISCHGERAET HILFSENERGIE AC 50 HZ 220 V
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21S FUER GERINGE GASMENGEN, 0 BIS 100% CO2, TISCHGERAET HILFSENERGIE AC 60 HZ 240 V
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21S FUER GERINGE GASMENGEN, 0 BIS 100% CO2, TISCHGERAET HILFSENERGIE AC 50 HZ 110 V
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21S FUER GERINGE GASMENGEN, 0 BIS 100% CO2, TISCHGERAET HILFSENERGIE AC 60 HZ 120 V
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21S FUER GERINGE GASMENGEN, 0 BIS 100% CO2, TISCHGERAET HILFSENERGIE AC 60 HZ 240 V
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 5 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 10 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22/O2 MESSKOMPONENTE O2, MESSBEREICH 0 BIS 25 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22/O2 MESSKOMPONENTE O2, MESSBEREICHE 0...5 %/0...25 %
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22/O2 MESSKOMPONENTE O2, MESSBEREICHE 0...10 %/0...25 %
(12.000Gr.)
|
|
GASANALYSEGERAET, EIGNUNGSGEPRUEFT VOM TUEV, FUER FELDMONTAGE
(32.000Gr.)
|
|
GASANALYSEGERAET, EIGNUNGSGEPRUFT VOM TUEV, EINSCHUB ZUM EINBAU IN SCHRANK
(20.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 21 FUER EINE MESSKOMPONENTE, TUEV-GEPRUEFT, OHNE KONDENSATABSCHEIDER
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 22 FUER 2 MESSKOMPONENTEN, TUEV-GEPRUEFT, OHNE KONDENSATABSCHEIDER
(12.000Gr.)
|
|
ABGASMESSGERAET ETT, AU-ABLAUF EUROPA ALLG.
(14.500Gr.)
|
|
ABGASMESSGERAET ETT, AU-ABLAUF FRANKREICH
(15.000Gr.)
|
|
ABGASMESSGERAET ETT, DUO-MODUL.
(15.500Gr.)
|
|
ABGASMESSGERAET ETT, AU-ABLAUF DAENEMARK
(14.500Gr.)
|
|
ABGASMESSGERAET ETT, AU-ABLAUF SCHWEDEN
(14.500Gr.)
|
|
U13L SIEMENS
(14.500Gr.)
|
|
ABGASMESSGERAET GT 1151, SOFTWARE AK-SCHNITTSTELLE
(14.500Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF FRANKREICH, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF IRLAND, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF CHINA, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF SPANIEN, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF POLEN, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AK-SCHNITTSTELLE, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF SCHWEDEN, DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET VAS 5067, AU-ABLAUF DAEN./ NORW., DRUCKER
(13.000Gr.)
|
|
ABGASMESSGERAET ETT, DUO-MODUL.
(12.000Gr.)
|
|
DIESELTESTER KUNDENSPEZIFISCHE AUSFUEHRUNG
(27.000Gr.)
|
|
DIESELMESSKOPF DIBENCH NEU KUNDENSPEZIFISCHE AUSFUEHRUNG
(10.000Gr.)
|
|
MESSLEITUNG BATTERIERESTWELLIGKEIT
(99Gr.)
|
|
OELTEMPERATUR- VERLAENGERUNGSKABEL, 3M LANG, FUER DIBENCH
(99Gr.)
|
|
MESSLEITUNG NADELBEWEGUNGSFUEHLER
(150Gr.)
|
|
RAUCHDICHTEMESSEINRICHTUNG OPACIMAT-D HILFSENERGIE AC230V, 48 BIS 63 BESTEHEND AUS MESSKOPF KOMPLETT PKW-ENTNAHMESONDE BEDIEN- UND ANZEIGEGERAET MIT PROTOKOLLDRUCKER, EINSCHUBTASTA TUR, EEPROM MIT IN DEUTSCHLAND ZUGELASSENEN ABGASPRUEFSTAND
(32.000Gr.)
|
|
OPACIMAT ALLG., AU-ABLAUF OESTERREICH
(35.000Gr.)
|
|
OPACIMAT ALLG., AU-ABLAUF SPANIEN
(32.000Gr.)
|
|
OPACIMAT VAS5069, AU-ABLAUF DEUTSCHLAND
(32.000Gr.)
|
|
OPACIMAT VAS5069, AU-ABLAUF SCHWEDEN,
(32.000Gr.)
|
|
OPACIMAT VAS5069, AU-ABLAUF POLEN
(32.000Gr.)
|
|
OPACIMAT VAS5069, AU-ABLAUF DAEN./ NORW.
(32.000Gr.)
|
|
RAUCHDICHTEMESSEINRICHTUNG OPACIMAT - EU HILFSENERGIE AC 230 V, 48 BIS 6 BESTEHEND AUS: MESSKOPF KOMPLETT MIT PKW-ENT- NAHMESONDE D.10MM, LAENGE 1M OELTEMPERATURGEBER LAENGE 0,8M KLEMMGEBERKABEL LAENGE 3M KLEMMGEBER D.6MM, SIGNALKABEL LAENGE 8M, HEIZKABEL
(32.000Gr.)
|
|
SIBENCH 3K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.400Gr.)
|
|
SIBENCH 3K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.400Gr.)
|
|
SIBENCH 3K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.400Gr.)
|
|
SIBENCH 3K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.400Gr.)
|
|
SIBENCH 3K, CUSTOMER SPECIFIC VERSION
(1.400Gr.)
|
|
SIBENCH 3 K CUSTOMER SPECIFIC VERSION
(1.400Gr.)
|
|
SIBENCH 3K CUSTOMER SPECIFIC VERSION
(1.400Gr.)
|
|
SIBENCH 3K, CO, CO2, HC, ACCORDING TO CUSTOMERS SPECIFICATIONS
(1.400Gr.)
|
|
SIBENCH 3K NIDR OPTICAL BENCH FOR CAR EXHAUST TESTER WITH NIDR NO-CHANNEL . CO: 0 TO 14 % CO2: 0 TO 18 % . HC: 0 TO 9999 PPM NO: 0 TO 5000 PPM O2: 0 TO 25 % THE. EL. CHEM. SENSOR FOR O2 IS NOT PART OF THE SHIPMENT POWER SUPP
(1.400Gr.)
|
|
SIBENCH 3K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(2.000Gr.)
|
|
SIBENCH 2K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.300Gr.)
|
|
SIBENCH 2K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(1.300Gr.)
|
|
SIBENCH 4K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(2.000Gr.)
|
|
SIBENCH 4K, CUSTOMER SPECIFIC VERSION
(2.000Gr.)
|
|
SIBENCH 4K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(2.000Gr.)
|
|
SIBENCH 4K, KUNDENSPEZIFISCHE AUSFUEHRUNG
(2.000Gr.)
|
|
SIBENCH 4K NIDR-MESSBANK FUER ABGASTESTER MIT NIDR NO-KANAL CO: 0 BIS 14 % . CO2: 0 BIS 18 % HC: 0 BIS 9999 PPM NO: 0 BIS 5000 PPM O2: 0 BIS 25 % DER. EL. CHEM. SENSOR FUER O2 GEHOERT NICHT ZUM LIEFERUMFANG HILFSENERGIE: 9,6 BIS 16 VDC AUFWAERMZEIT: 60 S O
(2.000Gr.)
|
|
PROBENCH, PUMP-FILTER-COMB.
(1.450Gr.)
|
|
SAMPLE PREPARATION MODULE WITH- OUT PUMP, INCL. 1 SOLENOID VALVE, 3 PCS. FINEFILTER, 2 PCS. HC ABSORPTION FILTER, 1 FLOW SENSOR, 2 SOCKETS FOR EL. CHEM. O2 AND NO SENSOR
(14.500Gr.)
|
|
EBOX-PC - CUSTOMER SPECIFIC VERSION
(14.500Gr.)
|
|
EBOX-PC - CUSTOMER SPECIFIC VERSION WITH SBENCH 4K
(14.500Gr.)
|
|
E-BOX PC, MESSMODUL FUER DIESEL- UND OTTO-FAHRZEUGE
(8.000Gr.)
|
|
DIESELTESTER + DIBENCH NEU KUNDENSPEZIFISCHE AUSFUEHRUNG
(14.500Gr.)
|
|
DIESELTESTER + DIBENCH- AUFGEARBEITET KUNDENSPEZIFISCHE AUSFUEHRUNG
(14.500Gr.)
|
|
EBOX-PC KUNDENSPEZIFISCHE AUSFUEHRUNG
(14.500Gr.)
|
|
EBOX-PC + DIBENCH-NEU KUNDENSPEZIFISCHE AUSFUEHRUNG
(14.500Gr.)
|
|
EBOX-PC + DIBENCH- AUFGEARBEITET KUNDENSPEZIFISCHE AUSFUEHRUNG
(14.000Gr.)
|
|
EBOX-PC WITHOUT SMOKEMETER MEASURING HEAD - CUSTOMER SPECIFIC VERSION
(14.500Gr.)
|
|
EBOX- PC + DIBENCH NEW- CUSTOMER SPECIFIC VERSION
(14.500Gr.)
|
|
JUSTIERSET FUER E-BOX PC BESTEHEND AUS: DRUCKREDUZIERVENTIL, VITONSCHLAUCH 42CM, DROSSEL 30 X 0,4 MM
(14.500Gr.)
|
|
FILTERSET FUER E_BOX PC,10 ST. FEINFILTER C79127-Z4000-A1
(200Gr.)
|
|
WARTUNGSSET FUER JAEHRLICHE WARTUNG DES E-BOX PC, 1 ST. AKTIVKOHLEFILTER C79127-Z1473-A1, 1 ST. O2-SENSO W79085-G4002-X, VITONSCHLAUCH 30 CM
(350Gr.)
|
|
JUSTIERTEILE FUER EBOX- PC BESTEHEND AUS VITONSCHLAUCH 42 CM, DROSSEL 30 X 0,4MM
(250Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5F-2R FUER 2 MESSKOMPONENTEN FUER FELDMONTAGE
(31.500Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5F-2R-EX, EXPLOSIONSGESCHUETZT, FUER 2 MESSKOMPONENTEN
(52.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 5E-2R FUER 2 MESSKOMPONENTEN, EINSCHUB ZUM EINBAU IN SCHRANK
(23.000Gr.)
|
|
MESSSTELLENUMSCHALTER SELECTOR MIT EINGEBAUTEM CO2-CONTROLLER
(0Gr.)
|
|
MESSSTELLENUMSCHALTER SELECTOR FUER EXTERNES GASANALYSEGERAET AUSGANGSSIGNAL 0 BIS 20 MA
(0Gr.)
|
|
MESSSTELLENUMSCHALTER SELECTOR FUER EXTERNES GASANALYSEGERAET AUSGANGSSIGNAL 4 BIS 20 MA
(0Gr.)
|
|
FIDAMAT; DRUCKGERAETERICHTLINIE FUER GAS 1/FLUESSIG 1 ART. 3.3 SEP
(28.000Gr.)
|
|
BRENNLUFTAUFBEREITUNGSGERAET GASLEITUNGSANSCHLUESSE: TEFLONSCHLAUCH 4/6 MM
(0Gr.)
|
|
NEEDLE VALVE MADE OF STAINLESS STEEL GAS CONNECTION: THREADED JOINT FOR HOSE 4/6
(133Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, STAINLESS STEEL BODY, POWER SUPPLY DC 24 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB20, GAS CONNECTIONS G1/8 FEMALE
(347Gr.)
|
|
PRESSURE SWITCH FOR N2 OR INSTRUMENT AIR FROM GAS CYLINDER SWITCHING PRESSURE RANGE 0,5 TO 8 BAR
(224Gr.)
|
|
STRAIGHT MALE COUPLING 1/4 NPT MADE OF STAINLESS STEEL 8MM OUTER DIAMETER
(35Gr.)
|
|
SCREW CONNECTION G1/4 MADE OF POLYVINYLIDENE FLUORIDE FOR TEFLON HOSE WITH 6MM OUTER DIAMETER
(8Gr.)
|
|
SCREW CONNECTION G1/8 MADE OF POLYVINYLIDENE FLUORIDE FOR TEFLON HOSE WITH 6 MM OUTER DIAMETER
(5Gr.)
|
|
STAINLESS STEEL TUBING INSERT, 8 MM OD X 6 MM ID
(1Gr.)
|
|
STRAIGHT REDUCER COUPLING 6MM AND 8MM OUTER DIAMETERS
(39Gr.)
|
|
T-COUPLING 6MM OUTER DIAMETER
(61Gr.)
|
|
CERAMIC FILTER ELEMENT
(100Gr.)
|
|
NO LONGER AVAILABLE IN FDB REPLACED BY PRODUCT 7MB1943-0C*** HOWEVER ONLY SUITABLE FOR NEW PROJECTS BECAUSE MECHANICAL NOT COMPATIBLE
(34.400Gr.)
|
|
GAS SAMPLING PROBE FOR PROCESS GAS LINES, WITHOUT FILTER, WITH SHUT-OFF COCK AND SAMPLING PIPE WITH 6 MM OUTER DIAMETER
(1.545Gr.)
|
|
GAS SAMPLING PROBE FOR PROCESS GAS LINES, WITHOUT FILTER, WITH SHUT-OFF COCK AND SAMPLING PIPE WITH 12 MM OUTER DIAMETER
(12.000Gr.)
|
|
TWO STAGE PRESSURE REDUCER FOR CONNECTION TO GAS CYLINDER FOR CORROSIVE GASES; MATERIAL: STAINLESS STEEL OUTLET PRESSURE RANGE 0,05 TO 1 BAR INLET PRESSURE MAX.200 BAR
(1.627Gr.)
|
|
TWO STAGE PRESSURE REDUCER FOR CONNECTION TO GAS CYLINDER FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATET BRASS OUTLET PRESSURE RANGE 0,05 TO 1 BAR INLET PRESSURE MAX.200 BAR
(1.858Gr.)
|
|
SINGLE-STAGE PRESSURE REDUCER FOR INSTALLATION IN PIPES, FOR CORROSIVE GASES; MATERIAL: STAINLESS STEEL INLET PRESSURE MAX.50 BAR OUTLET PRESSURE RANGE 0,5 TO 1 BAR
(669Gr.)
|
|
SINGLE-STAGE PRESSURE REDUCER FOR INSTALLATION IN PIPES, FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATED BRASS INLET PRESSURE MAX.20 BAR OUTLET PRESSURE RANGE 0,5 TO 1 BAR
(817Gr.)
|
|
TWO-STAGE PRESSURE REDUCER FOR CONNECTION TO GAS CYLINDER FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATED BRASS OUTLET PRESSURE RANGE 0,5 TO 8 BAR INLET PRESSURE MAX.200 BAR
(1.651Gr.)
|
|
TWO-STAGE PRESSURE REDUCER WITH CONTACT MANOMETER ON THE HIGH-PRESSURE SIDE FOR CONNECTION TO GAS BOTTLES, MADE OF STAINLESS STEEL FOR CORROSIVE GASES OUTLET PRESSURE RANGE 0,05 TO 1 BAR INLET PRESSURE MAX.200 BAR
(900Gr.)
|
|
TWO-STAGE PRESSURE REDUCER WITH CONTACT MANOMETER ON THE HIGH-PRESSURE SIDE FOR CONNECTION TO GAS BOTTLES FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATED BRASS OUTLET PRESSURE RANGE 0,05 TO 1 BAR INLET PRESSURE MAX.200 BAR
(2.355Gr.)
|
|
TWO-STAGE PRESSURE REDUCER FOR GAS BOTTLE 200 BAR MAX. HIGH-PRESSURE SIDE FOR CONNECTION TO GAS BOTTLES, MADE OF STAINLESS STEEL FOR CORROSIVE GASES; OUTLET PRESSURE RANGE 0,5 TO 8 BAR
(900Gr.)
|
|
TWO-STAGE PRESSURE REDUCER WITH CONTACT MANOMETER ON THE HIGH-PRESSURE SIDE FOR CONNECTION TO GAS BOTTLES FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATED BRASS OUTLET PRESSURE RANGE 0,5 TO 8 BAR INLET PRESSURE MAX.200 BAR
(2.196Gr.)
|
|
TWO-STAGE PRESSURE REDUCER WITH CONTACT MANOMETER ON THE HIGH-PRESSURE SIDE FOR CONNECTION TO GAS BOTTLES, MADE OF STAINLESS STEEL FOR CORROSIVE GASES; OUTLET PRESSURE RANGE 0,5 TO 8 BAR INLET PRESSURE MAX.200 BAR
(1.860Gr.)
|
|
SINGLE-STAGE PRESSURE REDUCER FOR INSTALLATION IN PIPES, FOR CORROSIVE GASES; MATERIAL: STAINLESS STEEL INLET PRESSURE MAX.50 BAR OUTLET PRESSURE RANGE 0,5 TO 1 BAR
(674Gr.)
|
|
SINGLE-STAGE PRESSURE REDUCER FOR INSTALLATION IN PIPES, FOR NON-CORROSIVE GASES; MATERIAL: CHROMIUM-PLATED BRASS INLET PRESSURE MAX.20 BAR OUTLET PRESSURE RANGE 0,5 TO 1 BAR
(704Gr.)
|
|
GENERAL PURPOSE PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE STAINLESS STEEL/PFA PRESSURE GAUGE -26 DEG.C...80 DEG.C 4X1/4 NPTI
(1.414Gr.)
|
|
GENERAL PURPOSE PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE STAINLESS STEEL/PEEK PRESSURE GAUGE -26 DEG.C...150 DEG.C 4X1/4 NPTI ENHANCED TEMPERATURE RANGE
(1.300Gr.)
|
|
GENERAL PURPOSE PRESSURE REGULATOR 0-7 BAR OUTLET PRESSURE STAINLESS STEEL/PFA PRESSURE GAUGE -26 DEG.C...80 DEG.C 4X1/4 NPTI
(1.300Gr.)
|
|
GENERAL PURPOSE PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE BRASS/PFA PRESSURE GAUGE -26 DEG.C...80 DEG.C 4X1/4 NPTI
(1.300Gr.)
|
|
GENERAL PURPOSE PRESSURE REGULATOR 0-7 BAR OUTLET PRESSURE BRASS/PFA PRESSURE GAUGE -26 DEG.C...80 DEG.C 4X1/4 NPTI
(1.459Gr.)
|
|
CYLINDER PRESSURE REGULATOR SINGLE STAGE 0-4 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR SINGLE STAGE 0-4 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.158Gr.)
|
|
CYLINDER PRESSURE REGULATOR SINGLE STAGE 0-4 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR SINGLE STAGE 0-4 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(1.967Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.200Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.200Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(2.200Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.200Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.600Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.600Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(2.600Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE STAINLESS STEEL/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.600Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.672Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.506Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-1,5 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.979Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY AND SECONDARY PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(1.800Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 1 H2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 10 N2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 9 SYN. AIR OR O2 OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER PRESSURE REGULATOR DUAL STAGE 0-10 BAR OUTLET PRESSURE NICKEL PLATED BRASS/FKM PRIMARY CONTACT- AND STANDARD SEC. PRESSURE GAUGE CYLINDER CONNECTION: DIN 477 NO. 14 CALIBRATION GAS OUTLET CONN.: 6 MM FITTING
(2.300Gr.)
|
|
CYLINDER STATION DUAL STAGE 5-17 BAR OUTLET PRESSURE STAINLESS STEEL STANDARD PRESSURE GAUGE AUTOMATIC CHANGEOVER W/O PIGTAILS WITH 2 CYLINDER HOLDER
(7.200Gr.)
|
|
CYLINDER STATION DUAL STAGE 5-17 BAR OUTLET PRESSURE STAINLESS STEEL CONTACT PRESSURE GAUGE AUTOMATIC CHANGEOVER W/O PIGTAILS WITH 2 CYLINDER HOLDER
(10.404Gr.)
|
|
CYLINDER STATION DUAL STAGE 5-17 BAR OUTLET PRESSURE BRASS STANDARD PRESSURE GAUGE AUTOMATIC CHANGEOVER W/O PIGTAILS WITH 2 CYLINDER HOLDER
(8.200Gr.)
|
|
CYLINDER STATION DUAL STAGE 5-17 BAR OUTLET PRESSURE BRASS CONTACT PRESSURE GAUGE AUTOMATIC CHANGEOVER W/O PIGTAILS WITH 2 CYLINDER HOLDER
(7.800Gr.)
|
|
VAPORISING PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE STAINLESS STEEL/VESPEL PRESSURE GAUGE -20 DEG.C...40 DEG.C 4X1/4 NPTI 230V
(2.860Gr.)
|
|
VAPORISING PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE STAINLESS STEEL/VESPEL PRESSURE GAUGE -20 GRD.C...40 GRD.C 4X1/4 NPTI 115V
(2.300Gr.)
|
|
BACK PRESSURE REGULATOR 0-1,7 BAR OUTLET PRESSURE STAINLESS STEEL/CTFE PRESSURE GAUGE -26 DEG.C...80 DEG.C 4X1/4 NPTI
(1.300Gr.)
|
|
CYLINDER PIGTAIL H2
(500Gr.)
|
|
CYLINDER PIGTAIL N2
(500Gr.)
|
|
CYLINDER PIGTAIL HE
(500Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 200C CAN NOT BE SHORTENED PTFE HOSE 4/6MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M PREASSEMBLY REQUIRED
(800Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 200C CAN NOT BE SHORTENED PTFE HOSE 6/8MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M PREASSEMBLY REQUIRED
(100Gr.)
|
|
ADDITIONAL SAMPLE GAS OUTLET, STRAIGHT, FOR HEATED SAMPLE GAS LINE "FIDAMAT"
(400Gr.)
|
|
LENGTH-DEPENDENT DATA FOR HEATED SAMPLE GAS LINE FIDAMAT, X-PART (Y-PART INSIDE CABINET): HOSE: PTFE-HOSE 4/6 MM OUTER SHEATH, X-PART: POLYAMID CORRUGATED HOSE, OUTER SHEATH Y-PART: SILICONE FOAM HOSE, DELIVERY UNIT: 1 M, PREASSEMBLY REQUIRED
(400Gr.)
|
|
LENGTH-DEPENDENT DATA FOR HEATED SAMPLE GAS LINE FIDAMAT, X-PART (Y-PART INSIDE CABINET): HOSE: PTFE-HOSE 6/8 MM OUTER SHEATH, X-PART: POLYAMID CORRUGATED HOSE, OUTER SHEATH Y-PART: SILICONE FOAM HOSE, DELIVERY UNIT: 1 M, PREASSEMBLY REQUIRED
(400Gr.)
|
|
FILTER INSERT MADE OF TEFLON (PTFE)
(0Gr.)
|
|
CONDENSATE PRESEPERATOR MADE OF GLASS
(231Gr.)
|
|
CAP FOR CONNECTION NOZZLE
(5Gr.)
|
|
GASKET FOR HOSE 4 X 6 MM
(1Gr.)
|
|
GASKET FOR HOSE 6 X 8 MM
(1Gr.)
|
|
GASKET FOR HOSE 8 X 10 MM
(1Gr.)
|
|
MOUNTING CLAMP FOR CONDENSATE PRESEPERATOR
(128Gr.)
|
|
PRELIMINARY CONDENSATION TRAP MADE OF GLASS, WITH BAND CLAMP, CASING FOR CONNECTING PIECE AND SEALS FOR TUBE 4/6
(387Gr.)
|
|
CONDENSATE TANK COMPLETE MOUNTED, BUT WITHOUT LIQUID LEVEL INDICATOR MATERIAL OF THE TANK: POLYETHYLENE TANK CAPACITY: 19L QUICK CONNECTORS FOR INLET AND AIR OUTLET FOR PTFE-TUBE 4/6
(1.050Gr.)
|
|
LIQUID LEVEL INDICATOR 24 V DC POWER SUPPLY
(230Gr.)
|
|
KONFEKTIONIERUNG FUER TEMPERATURGEREGELTE, BEHEIZTE MESSGASLEITUNG FUER BETRIEBSTEMPERATUREN BIS 200øC, TEFLONSEELE NICHT AUSTAUSCHBAR, MIT 1 TEMPERATURFUEHLER PT100, ABGANG IM SCHRANKINNERN 90ø, Y-TEIL 2000 MM
(1.200Gr.)
|
|
KONFEKTIONIERUNG FUER TEMPERATURGEREGELTE, BEHEIZTE MESSGASLEITUNG FUER BETRIEBSTEMPERATUREN BIS 200øC, TEFLONSEELE NICHT AUSTAUSCHBAR, MIT 1 TEMPERATURFUEHLER PT100, ABGANG IM SCHRANKINNERN 90ø, Y-TEIL 1500 MM
(1.200Gr.)
|
|
KONFEKTIONIERUNG FUER TEMPERATURGEREGELTE, BEHEIZTE MESSGASLEITUNG FUER BETRIEBSTEMPERATUREN BIS 200øC, TEFLONSEELE NICHT AUSTAUSCHBAR, MIT 1 TEMPERATURFUEHLER PT100, ABGANG IM SCHRANKINNERN 90ø, Y-TEIL 1000 MM
(800Gr.)
|
|
KONFEKTIONIERUNG FUER TEMPERATURGEREGELTE, BEHEIZTE MESSGASLEITUNG FUER BETRIEBSTEMPERATUREN BIS 200øC, TEFLONSEELE NICHT AUSTAUSCHBAR, MIT 1 TEMPERATURFUEHLER PT100, ABGANG IM SCHRANKINNERN 90ø, Y-TEIL 500 MM
(400Gr.)
|
|
PREASSEMBLED PACK FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FIDAMAT UP TO 200 C, PTFE-HOSE 4/6 MM FOR ANALYSER CABINET NON-REPLACEABLE TEFLON CORE WITH 1 PT100 TEMPERATURE SENSOR POWER SUPPLY: 230V, 50/60HZ
(2Gr.)
|
|
PREASSEMBLED PACK FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FIDAMAT UP TO 200 C, PTFE-HOSE 6/8 MM FOR ANALYSER CABINET NON-REPLACEABLE TEFLON CORE WITH 1 PT100 TEMPERATURE SENSOR POWER SUPPLY: 230V, 50/60HZ
(2Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FIDAMAT UP TO 200 C, PTFE-HOSE 4/6 MM FOR ANALYSER CABINET NON-REPLACEABLE TEFLON CORE DELIVERY UNIT 0,1 M, MIN 0,5M PREASSEMBLY REQUIRED
(1.000Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FIDAMAT UP TO 200 C, PTFE-HOSE 6/8 MM FOR ANALYSER CABINET NON-REPLACEABLE TEFLON CORE DELIVERY UNIT 0,1 M, MIN 0,5M PREASSEMBLY REQUIRED
(1.000Gr.)
|
|
FILTER WITH GASIN-/OUTLET HEATED FOR FIDAMAT AND GASOUTLET UNHEATED FOR COLD MEASUREMENT HEATED UP TO 180C GASINLET LEFT-HAND WITH ADJUSTABLE THERMOSTAT POWER SUPPLY: 230V, 50/60HZ
(8.240Gr.)
|
|
FILTER WITH GASIN-/OUTLET HEATED FOR FIDAMAT AND GASOUTLET UNHEATED FOR COLD MEASUREMENT HEATED UP TO 180C GASINLET RIGHT-HAND WITH ADJUSTABLE THERMOSTAT POWER SUPPLY: 230V, 50/60HZ
(6.000Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 120C CAN BE SHORTENED PTFE HOSE 4/6MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M PREASSEMBLY REQUIRED
(400Gr.)
|
|
LENGTH-DEPENDENT DATA FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 120C CAN BE SHORTENED PTFE HOSE 6/8MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M PREASSEMBLY REQUIRED
(400Gr.)
|
|
PREASSEMBLED PACK FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 120C CAN BE SHORTENED BOTH SIDES PREASSEMBLED WITH PTFE-HOSE NON-REPLACEABLE WITH 1 PT100 TEMPERATURE SENSOR
(200Gr.)
|
|
TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 120C CAN BE SHORTENED PTFE HOSE 4/6MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M NEITHER SIDE PREASSEMBLED WITH 1 PT100 TEMPERATURE SENSOR
(400Gr.)
|
|
TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 120C CAN BE SHORTENED PTFE HOSE 6/8MM, OUTER SHEATH: POLYAMIDE CORRUGATED HOSE DELIVERY UNIT: 1M NEITHER SIDE PREASSEMBLED WITH 1 PT100 TEMPERATURE SENSOR
(400Gr.)
|
|
ASSEMBLY SET FOR CONNECTION OF A HEATED SAMPLE GAS LINE COMPRISING OF: 1 SILICONE END CAP 1 CONNECTION SET FOR HEATER BAND 1 PT100 TEMPERATURE SENSOR
(200Gr.)
|
|
ASSEMBLY SET FOR CONNECTION OF A HEATED SAMPLE GAS LINE COMPRISING OF: 1 SILICONE END CAP 1 CONNECTION SET FOR HEATER BAND
(400Gr.)
|
|
HEAT-RESISTANT ADHESIVE TAPE (33M) NOTE: 10M ARE REQUIRED TO ASSEMBLE A LINE
(200Gr.)
|
|
SILICONE ADHESIVE (1 TUBE) NOTE: HALF A TUBE IS REQUIRED TO ASSEMBLE A LINE
(400Gr.)
|
|
UNIVERSAL FILTER WITH ELEMENT MADE OF GLASS FIBERS, PORE SIZE 2 MICRON, FILTER HEAD OF PVDF, ENCLOSURE MADE OF GLASS, GAS CONNECTIONS G1/4 FEMALE
(294Gr.)
|
|
UNIVERSAL FILTER WITH ELEMENT MADE OF TEFLON, PORE SIZE 2 MICRON, FILTER HEAD OF PVDF, ENCLOSURE MADE OF GLASS, GAS CONNECTIONS G1/4 FEMALE
(242Gr.)
|
|
CONNECTION UNIT FOR MAX. TWO MOISTURE SENSORS, POWER SUPPLY 115/230VAC, 50/60 HZ, SWITCHABLE; WALL MOUNTING
(656Gr.)
|
|
BESCHALTUNGSGERAET FUER MAX. 2 FEUCHTESENSOREN, HILFSENERGIE 115/230 VAC, 50/60 HZ, UMSCHALTBAR; HUTSCHIENENMONTAGE
(200Gr.)
|
|
FLOW ADAPTER FOR INSTALLATION OF MOISTURE SENSOR INTO SAMPLE GAS LINE, MADE OF PVDF GAS CONNECTIONS G1/4 FEMALE
(36Gr.)
|
|
FILTER ELEMENT MADE OF GLASS FIBER, 2 MICRON (PORE SIZE) SET OF 5 PIECES
(17Gr.)
|
|
FILTER ELEMENT MADE OF TEFLON, 2 MICRON (PORE SIZE) SET OF 5 PIECES
(82Gr.)
|
|
COALESCENCE FILTER WITH FILTER ELEMENT MADE OF BOROSILICATE FIBER
(408Gr.)
|
|
FILTER ELEMENT MADE OF BOROSILICATE FIBER
(42Gr.)
|
|
FILTER-EDELSTAHLGEHAEUSE MIT PTFE-DICHTUNG, ANSCHLUSSGEWINDE 1/4 NPT
(450Gr.)
|
|
FILTERELEMENT AUS BOROSILIKATGLASFASER ZUR FESTSTOFFABSCHEIDUNG IN GASFOERMIGEN PROBEN (1 PAK = 10 STUECK)
(100Gr.)
|
|
FILTERELEMENT AUS EDELSTAHL ZUR FESTSTOFFABSCHEIDUNG IN FLUESSIGEN PROBEN
(100Gr.)
|
|
KONDENSATSPERRE MIT G 1/4" ANSCHLUESSEN
(30Gr.)
|
|
CONDENSATE TRAP WT 20.5 CONNECTIONS BOTH ENDS 6MM PIPE MEMBRANE PTFE
(16Gr.)
|
|
CONDENSATE TRAP WT 20.5 CONNECTIONS BOTH ENDS 1/8 NPT EXTERNAL THREAD MEMBRANE PTFE
(17Gr.)
|
|
1 PC CONNECTION ADAPTER 6MM PIPE CONNECTION ON TUBE FITTING 6/4MM . 2 PCS ARE NECESSARY
(10Gr.)
|
|
1 PIECED CONNECTION ADAPTER 1/8 NPT TREAD CONNECTION ON TUBE FITTING 6/4MM . 2 PCS ARE NECESSARY
(4Gr.)
|
|
CONDENSATION TRAP WT20.82 IN SS-HOUSING GAS CONNECTION INLET/BYPASS 1/4 NPT-FEMALE GAS CONNECTION OUTLET 1/8 NPT-FEMALE MAX. OPERATING PRESSURE 50 BAR MAX. WATER PRESSURE 0,8 BAR MAX GASFLOW 300L/H O-RINGS VITON
(1.735Gr.)
|
|
MEMBRANE FOR WT 20.82
(32Gr.)
|
|
SET OF O-RINGS FOR WT 20.82 VITON
(14Gr.)
|
|
SET OF O-RINGS FOR WT 20.82 PTFE
(8Gr.)
|
|
CONTROLLER FOR CONNECTION OF 1 PC. OF MOISTURE DETECTOR WITH INTRINSICALLY SAFE INPUT POWER SUPPLY: 230 V AC
(1.000Gr.)
|
|
CONTROLLER FOR CONNECTION OF 1 PC. OF MOISTURE DETECTOR WITH INTRINSICALLY SAFE INPUT POWER SUPPLY: 115 V AC
(1.000Gr.)
|
|
CONTROLLER FOR CONNECTION OF MAX. 2 MOISTURE DETECTORS WITHOUT EXPLOSION PROTECTION POWER SUPPLY: 24 V DC
(245Gr.)
|
|
FLOW ADAPTER MADE OF STAINLESS STEEL SUPPORTING A MOISTURE DETECTOR
(200Gr.)
|
|
FILTER HOUSING MADE OF STAINLESS STEEL 1.4404 (SS316L) WITHOUT FILTER CARTRIDGE
(775Gr.)
|
|
MOUNTING BRACKET STAINLESS STEEL 1.4301 FOR FILTER 7MB1943-2AC44 40 MM WIDE, 47,5 MM DEPTH
(59Gr.)
|
|
PLUG MALE NPT 1/4 INCH, STAINLESS STEEL SS316 FOR FILTER 7MB1943-2AC44
(28Gr.)
|
|
FILTER CARTRIDGE 2 MICRON FOR FILTER 7MB1943-2AC44
(2Gr.)
|
|
FILTER CARTRIDGE 5 MICRON FOR FILTER 7MB1943-2AC44
(1Gr.)
|
|
MOISTURE DETECTOR CABLE LENGTH 4 M, FOR WATCHING OF MOISTURE BREAKTHROUGH IN SAMPLE GAS
(269Gr.)
|
|
PARTICLE AND COALESCENCE FILTER FILTERHOUSING MADE OF PVDF, FILTER HEAD MADE OF DURANGLAS 4X 1/4 G THREAD, FEMALE WITH O-RING FKM (VITON), 2 PIECES PLUGS (PVDF) WITHOUT MOUNTING BRACKET WITHOUT FILTER ELEMENT
(1.000Gr.)
|
|
PARTICLE AND COALESCENCE FILTER FILTERHOUSING MADE OF STAINLESS STEEL (1.4571-316 TI) FILTER HEAD MADE OF STAINLESS STEEL 4X 1/4 NPT THREAD, FEMALE WITH O-RING FKM (VITON), 2 PC PLUGS (STAINLESS STEEL) WITHOUT MOUNTING BRACKET WITHOUT FILTER ELEMENT
(1.200Gr.)
|
|
PARTICLE AND COALESCENCE FILTER FILTERHOUSING MADE OF STAINLESS STEEL (1.4571-316 TI) FILTER HEAD MADE OF DURANGLAS 4X 1/4 NPT THREAD, FEMALE WITH O-RING FKM (VITON), 2 PC PLUGS (STAINLESS STEEL) WITHOUT MOUNTING BRACKET WITHOUT FILTER ELEMENT
(800Gr.)
|
|
SET (5 PIECES) FILTER ELEMENTS FOR PARTICLE FILTRATION MATERIAL BOROSILICATE MICROGLASSFIBERS PORESIZE 0,1 MICRON
(200Gr.)
|
|
SET (5 PIECES) FILTER ELEMENTS COALESCING FILTRATION (REMOVAL OF OILS AND AEROSOLS) MATERIAL BOROSILICATE MICROGLASSFIBERS PORESIZE 0,1 MICRON
(200Gr.)
|
|
1 PIECE MOUNTING BRACKET FOR WALL MOUNTING MADE OF 1.4571
(300Gr.)
|
|
1 PIECE MOUNTING BRACKET FOR PANEL MOUNTING MADE OF 1.4571
(280Gr.)
|
|
BURST PROTECTION FOR GLAS TOP MADE OF ACRYLIC GLAS
(300Gr.)
|
|
1 PIECE FILTER TOP PART MADE OF DURANGLAS
(10Gr.)
|
|
1 PIECE OF O-RING (FKM) STANDARD
(50Gr.)
|
|
1 PIECE OF O-RING (PTFE) INSTEAD OF THE FKM O-RING
(50Gr.)
|
|
1 PIECE OF O-RING (FFKM) INSTEAD OF THE FKM O-RING
(50Gr.)
|
|
PREASSEMBLED PACK FOR TEMPERATURE-CONTROLLED, HEATED SAMPLE GAS LINE FOR OPERATING TEMPERATURES UP TO 200C CAN NOT BE SHORTENED BOTH SIDES PREASSEMBLED WITH PTFE-HOSE NON-REPLACEABLE WITH 1 PT100 TEMPERATURE SENSOR
(500Gr.)
|
|
REGULIERVENTIL AUS PVDF DN 4 / PN 10
(56Gr.)
|
|
SHUT-OFF BALL VALVE MADE OF STAINLESS STEEL FOR PIPE WITH 6 MM OUTER DIAMETER, MAX. 148 CEL.
(94Gr.)
|
|
3/2-WAY BALL VALVE MADE OF STAINLESS STEEL FOR MAX. PRESSURE 172 BAR
(174Gr.)
|
|
SHUT-OFF BALL VALVE MADE OF PVDF WITH MOUNTING BRACKET, GAS CONNECTION G1/4
(78Gr.)
|
|
3-WAY-MULTIWAY BALL VALVE MADE OF PVDF WITH MOUNTING BRACKET, GAS CONNECTION G1/4
(85Gr.)
|
|
5-WAY-MULTIWAY BALL VALVE MADE OF PVDF WITH MOUNTING BRACKET, GAS CONNECTION G1/4
(101Gr.)
|
|
SPACER FOR WALL MOUNTING OF A 5-WAY MULTIWAY BALL VALVE
(113Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, BODY MADE OF PVDF, POWER SUPPLY AC 230 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB22, GAS CONNECTIONS G3/8 FEMALE
(399Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, BODY MADE OF PVDF, POWER SUPPLY DC 24 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB20, GAS CONNECTIONS G3/8 FEMALE
(376Gr.)
|
|
2/2-WAY SOLENOID VALVE MADE OF PVDF, EXPLOSION-PROOF POWER SUPPLY AC/DC 24V
(400Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, STAINLESS STEEL BODY, POWER SUPPLY AC 230 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB22, GAS CONNECTIONS G1/8 FEMALE
(313Gr.)
|
|
2/2-WAY SOLENOID VALVE MADE OF STAINLESS STEEL, EXPLOSION-PROOF POWER SUPPLY AC/DC 230V
(400Gr.)
|
|
2/2-WAY SOLENOID VALVE MADE OF STAINLESS STEEL, EXPLOSION-PROOF POWER SUPPLY AC/DC 24V
(850Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, BODY MADE OF PVDF, POWER SUPPLY AC 230 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB22, GAS CONNECTIONS G3/8 FEMALE
(403Gr.)
|
|
3/2-WAY SOLENOID VALVE MADE OF PTFE, EXPLOSION-PROOF POWER SUPPLY AC/DC 230V
(400Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, BODY MADE OF PVDF, POWER SUPPLY DC 24 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB20, GAS CONNECTIONS G3/8 FEMALE
(407Gr.)
|
|
3/2-WAY SOLENOID VALVE MADE OF PTFE, EXPLOSION-PROOF TO 2G EEX ED II T4, POWER SUPPLY 24 V
(620Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, STAINLESS STEEL BODY, POWER SUPPLY AC 230 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB22, GAS CONNECTIONS G1/8 FEMALE
(963Gr.)
|
|
3/2-WAY SOLENOID VALVE MADE OF STAINLESS STEEL, EXPLOSION-PROOF POWER SUPPLY AC/DC 230V
(400Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, STAINLESS STEEL BODY, POWER SUPPLY DC 24 V TO CONNECT BY MEANS OF SOCKET WITH ORDER NO. 7MB1943-2BB20, GAS CONNECTIONS G1/8 FEMALE
(465Gr.)
|
|
3/2-WAY SOLENOID VALVE MADE OF STAINLESS STEEL, EXPLOSION-PROOF POWER SUPPLY AC/DC 24V
(856Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, STAINLESS STEEL BODY, EX-PROTECTION ACC. TO ATEX CODE II 2G EEX EM II T4 AND II 2D IP65 T=135 DEG C WITH TERMINAL BOX AND CABLE GLAND M20 X 1,5, WITHOUT FUSE, POWER SUPPLY 230V 50 HZ, GAS CONNECTIONS G1/4 FEMALE
(740Gr.)
|
|
SOLENOID VALVE, 2/2 WAYS, STAINLESS STEEL BODY, EX-PROTECTION ACC. TO ATEX CODE II 2G EEX EM II T4 AND II 2D IP65 T=135 DEG C WITH TERMINAL BOX AND CABLE GLAND M20 X 1,5, WITHOUT FUSE, POWER SUPPLY 24V DC, GAS CONNECTIONS G1/4 FEMALE
(743Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, STAINLESS STEEL BODY, EX-PROTECTION ACC. TO ATEX CODE II 2G EEX EM II T4 AND II 2D IP65 T=135 DEG C WITH TERMINAL BOX AND CABLE GLAND M20 X 1,5, WITHOUT FUSE, POWER SUPPLY 230V 50 HZ, GAS CONNECTIONS G1/4 FEMALE
(740Gr.)
|
|
APPLIANCE SOCKET ACC. DIN EN 175301-803, SIZE A FOR SOLENOID VALVES WITH POWER SUPPLY 12...24 V
(26Gr.)
|
|
APPLIANCE SOCKET ACC. DIN EN 175301-803, SIZE A FOR SOLENOID VALVES WITH POWER SUPPLY 200...240 V
(26Gr.)
|
|
VARIABLE AREA FLOWMETER GLASS CONE, FLOAT STEEL MEASURING RANGE 10...100 L/H, MAX. PRESSURE 4 BAR / PVDF, WITHOUT LIMIT SWITCH
(193Gr.)
|
|
DURCHFLUSSMESSER FUER AGGRESSIVE GASE, MESSKONUS AUS GLAS, SCHWEBERKOERPER AUS PEEK, DURCHFLUSS 10...100 L/H, MAX. DRUCK 6 BAR, OHNE GRENZWERTSIGNALGEBER
(400Gr.)
|
|
VARIABLE AREA FLOWMETER GLASS CONE, FLOAT STEEL MEASURING RANGE 10...100 L/H, MAX. PRESSURE 4 BAR / PVDF, WITH LIMIT SWITCH
(271Gr.)
|
|
DURCHFLUSSMESSER FUER AGGRESSIVE GASE, MESSKONUS AUS GLAS, SCHWEBERKOERPER AUS PEEK, DURCHFLUSS 10...100 L/H, MAX. DRUCK 6 BAR, MIT GRENZWERTSIGNALGEBER
(400Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 24 VDC, 1-CHANNEL
(144Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 24 VDC, 2-CHANNEL
(138Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 230 VAC, 1-CHANNEL
(143Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 230 VAC, 2-CHANNEL
(164Gr.)
|
|
FLOWMETER MADE OF PVDF WITH NEEDLE VALVE FOR HIGHLY CORROSIVE GASES, FLOW RANGE 25...140 L/H, GAS CONNECTIONS: G 1/8, MAX.PRESSURE 1 BAR
(600Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 115 VAC, 1-CHANNEL
(170Gr.)
|
|
ISOLATED SWITCH AMPLIFIER DRY CONTACTS OR NAMUR INPUTS 115 VAC, 2-CHANNEL
(163Gr.)
|
|
RING INITIATOR FOR FLOWMETER, LENGTH OF CONNECTION CABLE 2M, PERMISSIBLE AMBIENT TEMPERATURE -20 TO +70 GRDC
(48Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 10...100 L/H AIR, WITHOUT LIMIT SWITCH
(578Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 10...100 L/H AIR, WITH LIMIT SWITCH
(622Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 40...400 L/H AIR, WITH LIMIT SWITCH
(500Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 40..400 L/H AIR, WITHOUT LIMIT SWITCH
(400Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 80..800 L/H AIR, WITH LIMIT SWITCH
(400Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 80..800 L/H AIR, WITHOUT LIMIT SWITCH
(580Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 1..10 L/H WATER, WITHOUT LIMIT SWITCH
(400Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 1..10 L/H WATER, WITH LIMIT SWITCH
(400Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 4..40 L/H WATER WITHOUT LIMIT SWITCH
(578Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 4..40 L/H WATER, WITH LIMIT SWITCH
(300Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 8..80 L/H WATER WITHOUT LIMIT SWITCH
(300Gr.)
|
|
VARIABLE AREA FLOWMETER ALL-METAL DESIGN, MEASURING RANGE 8..80 L/H WATER, WITH LIMIT SWITCH
(300Gr.)
|
|
SOLENOID VALVE, 3/2 WAYS, STAINLESS STEEL BODY, EX-PROTECTION ACC. TO ATEX CODE II 2G EEX EM II T4 AND II 2D IP65 T=135 DEG C WITH TERMINAL BOX AND CABLE GLAND M20 X 1,5, WITHOUT FUSE, POWER SUPPLY 24V DC GAS CONNECTIONS G1/4 FEMALE
(743Gr.)
|
|
FUSE 100 MA FOR USE WITH SOLENOID VALVE, 230 V 50 HZ EX-PROTECTION ACC. TO ATEX
(17Gr.)
|
|
FUSE 1 A FOR USE WITH SOLENOID VALVE, 24 V DC EX-PROTECTION ACC. TO ATEX
(17Gr.)
|
|
2/2-WAY SOLENOID VALVE, PLUNGER-TYPE, VOLTAGE 24V DC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, GAS PORT CONNECTION NPT1/4, WITH CABLE PLUG NORMALLY CLOSED
(465Gr.)
|
|
2/2-WAY SOLENOID VALVE, PIVOT-TYPE, VOLTAGE 24V DC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, GAS PORT CONNECTION NPT1/4, WITH CABLE PLUG FUNCTION UNIVERSAL VALVE
(400Gr.)
|
|
2/2-WAY SOLENOID VALVE, PLUNGER-TYPE, VOLTAGE 24V UC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, EXPLOSION PROTECTED, GAS PORT CONNECTION NPT1/4, JUNCTION BOX AND FUSE, NORMALLY CLOSED
(540Gr.)
|
|
2/2-WAY SOLENOID VALVE, PLUNGER-TYPE, VOLTAGE 24V UC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, EXPLOSION PROTECTED, GAS PORT CONNECTIONS 2 NPT1/4 AND 3RD PORT G1/8, JUNCTION BOX AND FUSE, FUNCTION UNIVERSAL VALVE
(540Gr.)
|
|
3/2-WAY SOLENOID VALVE, PLUNGER-TYPE, VOLTAGE 24V DC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, GAS PORT CONNECTIONS 2 NPT1/4 AND 3RD PORT G1/8, WITH CABLE PLUG FUNCTION UNIVERSAL VALVE
(465Gr.)
|
|
2/2-WAY SOLENOID VALVE, PIVOT-TYPE, VOLTAGE 24V DC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, GAS PORT CONNECTION NPT1/4, WITH CABLE PLUG NORMALLY CLOSED
(400Gr.)
|
|
2/2-WAY SOLENOID VALVE, PIVOT-TYPE, VOLTAGE 24V UC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, EXPLOSION PROTECTED, GAS PORT CONNECTION NPT1/4, JUNCTION BOX AND FUSE, NORMALLY CLOSED
(750Gr.)
|
|
3/2-WAY SOLENOID VALVE, PIVOT-TYPE, VOLTAGE 24 VUC, VALVE BODY STAINLESS STEEL, SEAL MATERIAL FKM, EXPLOSION PROTECTED, GAS PORT CONNECTION NPT1/4, JUNCTION BOX AND FUSE, FUNCTION UNIVERSAL VALVE
(750Gr.)
|
|
FRONT MOUNTING FILTER WITH GLASS FIBER FILTER ELEMENT 0.1 .M (PORE SIZE)
(261Gr.)
|
|
CONSUMABLE MATERIAL GLASS FIBER FILTER ELEMENT 0.1 .M (PORE SIZE)
(4Gr.)
|
|
ADAPTER 4/6 - 10/14 FOR HOSE PUMP
(26Gr.)
|
|
STRAIGHT MALE COUPLING G 3/8 MADE OF PVDF, FOR PTFE HOSE DN 4/6
(11Gr.)
|
|
ELBOW COUPLING MADE OF PVDF, FOR PTFE HOSE DN 4/6
(19Gr.)
|
|
STAINLESS STEEL SUPPORTING SLEEVE FOR HOSE 4/6
(1Gr.)
|
|
ELBOW MALE COUPLING G 1/8 MADE OF PVDF, FOR PTFE HOSE DN 4/6
(7Gr.)
|
|
STRAIGHT MALE COUPLING 1/8 NPT 6MM OUTER DIAMETER
(24Gr.)
|
|
STRAIGHT MALE COUPLING 3/8 NPT 8MM OUTER DIAMETER
(49Gr.)
|
|
ELBOW MALE COUPLING G 1/4 MADE OF PVDF, FOR PTFE HOSE DN 4/6
(10Gr.)
|
|
ELBOW MALE COUPLING G 3/8 MADE OF PVDF, FOR PTFE HOSE DN 4/6
(17Gr.)
|
|
T-COUPLING MADE OF PVDF FOR PTFE HOSE DN 4/6
(11Gr.)
|
|
BULKHEAD UNION MADE OF PVDF, FOR PTFE HOSE DN 4/6
(9Gr.)
|
|
STRAIGHT MALE COUPLING 1/4 NPT 6MM OUTER DIAMETER
(33Gr.)
|
|
ELBOW MALE COUPLING 1/8 NPT 6MM OUTER DIAMETER
(35Gr.)
|
|
ELBOW MALE COUPLING 1/4 NPT 6MM OUTER DIAMETER
(38Gr.)
|
|
ELBOW MALE COUPLING 1/4 NPT 8MM OUTER DIAMETER
(48Gr.)
|
|
ELBOW MALE COUPLING 3/8 NPT 8MM OUTER DIAMETER
(69Gr.)
|
|
STRAIGHT COUPLING 6MM OUTER DIAMETER
(34Gr.)
|
|
STRAIGHT COUPLING 8MM OUTER DIAMETER
(42Gr.)
|
|
T-COUPLING 8MM OUTER DIAMETER
(88Gr.)
|
|
STRAIGHT BULKHEAD UNION 6MM OUTER DIAMETER
(51Gr.)
|
|
STRAIGHT BULKHEAD UNION 8MM OUTER DIAMETER
(65Gr.)
|
|
STRAIGHT MALE COUPLING G 1/8
(28Gr.)
|
|
STRAIGHT MALE COUPLING G 1/4
(45Gr.)
|
|
STRAIGHT MALE COUPLING G 1/4
(43Gr.)
|
|
STRAIGHT MALE COUPLING G 3/8
(60Gr.)
|
|
NO2/NO CONVERTER, 19-INCH PLUG-IN, HEIGHT 3 HU, VERSION AS METALLIC CONVERTER POWER SUPPLY AC 50/60HZ 115V
(10.000Gr.)
|
|
PTFE HOSE, DN 4/6 NATURAL COLOR IN METER
(99Gr.)
|
|
REPLACEMENT GRAPHITE CONVERTER CARTRIDGE FOR NO2/NO CONVERTER
(583Gr.)
|
|
REPLACEMENT METALLIC CONVERTER CARTRIDGE FOR NO2/NO CONVERTER
(400Gr.)
|
|
NO2-NO-KONVERTER 19-ZOLL-EINSCHUB, 3HE HOCH AUSFUEHRUNG MIT KOHLENSTOFF-KARTUSCHE HILFSENERGIE 230 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-KONVERTER 19-ZOLL-EINSCHUB, 3HE HOCH AUSFUEHRUNG MIT KOHLENSTOFF-KARTUSCHE HILFSENERGIE 115 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-KONVERTER WANDAUFBAUGEHAEUSE, 6HE HOCH AUSFUEHRUNG MIT KOHLENSTOFF-KARTUSCHE HILFSENERGIE 230 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-KONVERTER WANDAUFBAUGEHAEUSE, 6HE HOCH AUSFUEHRUNG MIT KOHLENSTOFF-KARTUSCHE HILFSENERGIE 115 VAC, 50/60HZ
(6.000Gr.)
|
|
REPLACEMENT GRAPHITE CONVERTER CARTRIDGE FOR
(140Gr.)
|
|
NO2-NO-CONVERTER 19-INCH RACK UNIT, HEIGHT 3 HU METALLIC CARTRIDGE VERSION POWER SUPPLY 230 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-CONVERTER 19-INCH RACK UNIT, HEIGHT 3 HU METALLIC CARTRIDGE VERSION POWER SUPPLY 115 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-KONVERTER WANDAUFBAUGEHAEUSE, 6HE HOCH AUSFUEHRUNG MIT EDELSTAHL-KARTUSCHE HILFSENERGIE 230 VAC, 50/60HZ
(6.000Gr.)
|
|
NO2-NO-KONVERTER WANDAUFBAUGEHAEUSE, 6HE HOCH AUSFUEHRUNG MIT EDELSTAHL-KARTUSCHE HILFSENERGIE 115 VAC, 50/60HZ
(6.000Gr.)
|
|
METALLIC-ERSATZKONVERTERPATRONE
(140Gr.)
|
|
NO2-NO CONVERTER 19-INCH RACK UNIT, HEIGHT 3HU STANDARD REACTOR CARTRIDGE VERSION POWER SUPPLY 230V, 50/60HZ
(6.768Gr.)
|
|
NO2-NO CONVERTER 19-INCH RACK UNIT, HEIGHT 3HU STANDARD REACTOR CARTRIDGE VERSION POWER SUPPLY 115V, 50/60HZ
(7.500Gr.)
|
|
REPLACEMENT STANDARD REACTOR CARTRIDGE FOR NO2-NO-CONVERTER
(370Gr.)
|
|
NO2-NO CONVERTER WITH BYPASS 19-INCH RACK UNIT, HEIGHT 3HU STANDARD REACTOR CARTRIDGE VERSION POWER SUPPLY 230V, 50/60HZ WITH BYPASS SOLENOID VALVES
(10.000Gr.)
|
|
NO2-NO CONVERTER WITH BYPASS 19-INCH RACK UNIT, HEIGHT 3HU STANDARD REACTOR CARTRIDGE VERSION POWER SUPPLY 115V, 50/60HZ WITH BYPASS SOLENOID VALVES
(7.500Gr.)
|
|
CONTROL ASSEMBLY FOR SHUT-OFF BALL VALVE, SWIVEL RANGE 90 DEGREES, FOR MAX. CONTROL PRESSURE 13.5 BAR
(550Gr.)
|
|
SHUT-OFF BALL VALVE MADE OF STAINLESS STEEL FOR PIPE WITH 6 MM OUTER DIAMETER; FOR MAX. 235 C AT 7 BAR
(327Gr.)
|
|
MOUNTING SET FOR BALL VALVE
(200Gr.)
|
|
MOUNTING SET FOR BALL VALVE
(200Gr.)
|
|
3/2-WAY BALL VALVE MADE OF STAINLESS STEEL FOR MAX. PRESSURE 70 BAR
(369Gr.)
|
|
CONTROL ASSEMBLY FOR SHUT-OFF BALL VALVE, SWIVEL RANGE 180 DEGREES, FOR MAX. CONTROL PRESSURE 13.5 BAR
(550Gr.)
|
|
5-WEGE-UMSCHALTKUGELHAHN AUS EDELSTAHL
(300Gr.)
|
|
ADJUSTABLE CHECK VALVE OPENING PRESSURE 0.2 - 3.5 BAR
(87Gr.)
|
|
ADJUSTABLE CHECK VALVE OPENING PRESSURE 3.5 - 10 BAR
(60Gr.)
|
|
NON-ADJUSTABLE CHECK VALVE OPENING PRESSURE 0.02 BAR
(60Gr.)
|
|
EINSTELLBARES UEBERSTROEMVENTIL AUS EDELSTAHL, OEFFNUNGSDRUCK 0.7 BIS 15 BAR, EXTERN EINSTELLBAR, ANSCHLUESSE 6MM SWAGELOK
(100Gr.)
|
|
SAMPLE PROBE HEATED 115-230V AC 50/60HZ, 400VA SELF REGULATING HEATER ELEMENT, LOW TEMPERATURE ALARM, COMPLETELY COVERED WITH AN INSULATION JACKET, WITHOUT WEATHER PROTECTION HOOD
(7.211Gr.)
|
|
SAMPLE PROBE HEATED 115-230VAC 50/60HZ, 400VA SELF REGULATING HEATER ELEMENT, LOW TEMPERATURE ALARM, COMPLETELY COVERED WITH AN INSULATION JACKET, WITH WEATHER PROTECTION HOOD
(11.800Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE FOR MANUAL SHUT-OFF, WITHOUT BACKFLUSHING, WITHOUT CAL. GAS CONNECTION, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE: FROM 50 TO 200 DEG C SUPPLY VOLTAGE 230V 50/60HZ
(22.000Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE FOR MANUAL SHUT-OFF, WITHOUT BACKFLUSHING, WITH CAL. GAS CONNECTION 6MM, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE: FROM 50 TO 200 DEG C SUPPLY VOLTAGE 230V 50/60HZ
(22.500Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE WITH PNEUMATIC ACTUATOR, CONTROLLED BY CUSTOMER, WITH BACKFLUSHING, WITHOUT CAL. GAS CONNECTION, UNHEATED AIR STORAGE TANK, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE:
(30.500Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE WITH PNEUMATIC ACTUATOR, CONTROLLED BY CUSTOMER, WITH BACKFLUSHING, WITH CAL. GAS CONNECTION 6MM, UNHEATED AIR STORAGE TANK, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE:
(31.000Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE WITH PNEUMATIC ACTUATOR, CONTROLLED BY CUSTOMER, WITH BACKFLUSHING, WITHOUT CAL. GAS CONNECTION, HEATED AIR STORAGE TANK, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE:
(31.500Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH BALL VALVE WITH PNEUMATIC ACTUATOR, CONTROLLED BY CUSTOMER, WITH BACKFLUSHING, WITH CAL. GAS CONNECTION 6MM, HEATED AIR STORAGE TANK, WEATHERPROOF COVER AND HEATING, TEMPERATURE CONTROL RANGE:
(32.000Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYPE G3/4, MATERIAL 1.4571, LENGTH 200 MM
(500Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYP G3/4, MATERIAL 1.4571, LENGTH 700 MM
(1.500Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYP G3/4, MATERIAL 1.4571, LENGTH 1000 MM
(2.000Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYP G3/4, MATERIAL 1.4571, LENGTH 1200 MM
(2.500Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYP G3/4, MATERIAL 1.4571, LENGTH 1500 MM
(3.000Gr.)
|
|
SAMPLING PIPE MADE OF PVDF FOR SAMPLE GAS PROBE WITH DEMISTER MADE OF ETFE LENGTH 800 MM
(2.000Gr.)
|
|
REPLACEMENT PART DEMISTER ETFE FOR THE SAMPLING PIPE MADE OF PVDF
(500Gr.)
|
|
UNHEATED EXTENSION PIPE FOR SAMPLE GAS PROBE TYP G3/4, MATERIAL 1.4571, LENGTH 500 MM
(1.000Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH DOWNSTREAM FILTER AND WEATHERPROOF COVER, HEATING ADJUSTABLE AT THE INSTALLED CONTROLLER WITH HIGH AND LOW TEMPERATURE ALARM, TEMPERATURE CONTROL RANGE: FROM 50 TO 200 DEG C AMBIENT TEMPERATURE RANGE: FROM -20 TO +70 DEG C MAX. OPERATING PRESSURE 6 BAR MAX. DUST CONTENT UP TO 2G/M3 SUPPLY VOLTAGE 230V 50/60HZ WITHOUT FILTER, WITHOUT PIPE ACCESSORIES TO BE ORDERED WITH SEPARATE ORDER NUMBERS
(14.000Gr.)
|
|
HEATED SAMPLE GAS PROBE WITH DOWNSTREAM FILTER AND WEATHERPROOF COVER, HEATING ADJUSTABLE AT THE INSTALLED CONTROLLER WITH HIGH AND LOW TEMPERATURE ALARM, TEMPERATURE CONTROL RANGE: FROM 50 TO 200 DEG C AMBIENT TEMPERATURE RANGE: FROM -20 TO +70 DEG C MAX. OPERATING PRESSURE 6 BAR MAX. DUST CONTENT UP TO 2G/M3 SUPPLY VOLTAGE 115V 50/60HZ WITHOUT FILTER, WITHOUT PIPE ACCESSORIES TO BE ORDERED WITH SEPARATE ORDER NUMBERS
(14.540Gr.)
|
|
SAMPLE GAS PROBE ATEX PROTECTED 1GD/2GD T4 T130 C ACCORD. TO ATEX, WITH DOWNSTREAM FILTER AND WEATHERPROOF COVER, WITH EX- TERMINAL BOX, TEMPERATURE SELF REGULATING AT 80 DEG C, AMBIENT TEMPERATURE RANGE: FROM -20 TO 50 DEG C, MAX. OPERATING PRESSURE 6 BAR MAX. DUST CONTENT UP TO 2G/M3 SUPPLY VOLTAGE 230V 50/60HZ WITHOUT FILTER, WITHOUT PIPE ACCESSORIES TO BE ORDERED WITH SEPARATE ORDER NUMBERS
(12.000Gr.)
|
|
SAMPLE GAS PROBE ATEX PROTECTED 1GD/2GD T4 T130 C ACCORD. TO ATEX, WITH DOWNSTREAM FILTER AND WEATHERPROOF COVER, WITH EX- TERMINAL BOX, TEMPERATURE SELF REGULATING AT 80 DEG C, AMBIENT TEMPERATURE RANGE: FROM -20 TO 50 DEG C, MAX. OPERATING PRESSURE 6 BAR MAX. DUST CONTENT UP TO 2G/M3 SUPPLY VOLTAGE 115V 50/60HZ WITHOUT FILTER, WITHOUT PIPE ACCESSORIES TO BE ORDERED WITH SEPARATE ORDER NUMBERS
(8.000Gr.)
|
|
EXTENSION OF SAMPLING PIPE12 (7MB1943-2FE12) STAINLESS STEEL 1.4571 L=1000 MM D=20X1,5 MM GAS TEMPERATURE UP TO 600 C WITHOUT CONNECTION FOR IN-SITU FILTER
(800Gr.)
|
|
SAMPLING PIPE MADE OF CERAMICS L=1000 MM, D=24 MM, GAS TEMPERATURE UP TO 1600 C, WITHOUT CONNECTION FOR IN-SITU FILTER
(1.300Gr.)
|
|
IN-SITU FILTER MADE OF SINTERED STAINLESS STEEL, L=237 MM, CONNECTION THREAD G3/4, GAS TEMPERATURE UP TO 600 C
(694Gr.)
|
|
IN-SITU FILTER MADE OF SINTERED STAINLESS STEEL, L=538 MM, CONNECTION THREAD G3/4, GAS TEMPERATURE UP TO 600 C
(1.978Gr.)
|
|
SAMPLING PIPE MADE OF HASTELLOY C4, L=1000 MM, D=12 MM, GAS TEMPERATURE UP TO 400 C, WITHOUT CONNECTION FOR IN-SITU FILTER
(4.000Gr.)
|
|
IN-SITU FILTER MADE OF CERAMICS L=478 MM, PORE SIZE 2 MICRON, GAS TEMPERATURE UP TO 1000 C, WITH ADAPTER FLANGE DN65 PN6 STAINLESS STEEL 1.4571
(5.500Gr.)
|
|
SAMPLING PIPE MADE OF INCONEL 600, L=1000 MM, D=21.3 MM, GAS TEMPERATURE UP TO 1050 C, WITHOUT CONNECTION FOR IN-SITU FILTER
(1.538Gr.)
|
|
SAMPLING PIPE MADE OF STAINLESS STEEL, L=1000 MM, D=20X1,5MM, GAS TEMPERATURE UP TO 600 C, WITHOUT CONNECTION FOR IN-SITU FILTER
(860Gr.)
|
|
ABWEISBLECH AUS EDELSTAHL FUER EINTRITTSFILTER AUS GESINTERTEM EDELSTAHL (PASSEND ZU 7MB1943-2FE03)
(2.000Gr.)
|
|
ABWEISBLECH AUS EDELSTAHL FUER EINTRITTSFILTER AUS GESINTERTEM EDELSTAHL (PASSEND ZU 7MB1943-2FE04)
(2.000Gr.)
|
|
DOWN-STREAM FILTER ELEMENT SINTERED CERAMIC PORE SIZE 3 MICRON WITH VITON O-RINGS
(106Gr.)
|
|
DOWN-STREAM FILTER ELEMENT SINTERED STAINLESS STEEL PORE SIZE 5 MICRON WITH VITON O-RINGS
(201Gr.)
|
|
DOWN-STREAM FILTER ELEMENT FOLDED STAINLESS STEEL WIRE MESH MATERIAL PORE SIZE 10 MICRON WITH VITON O-RINGS
(790Gr.)
|
|
SET OF O-RINGS FOR ALL DOWN-STREAM FILTER ELEMENTS MADE OF VITON
(4Gr.)
|
|
ENTNAHMEROHR AUS EDELSTAHL MIT ZWEI GEWINDEANSCHLUESSEN FUER DEN ANSCHLUSS EINES INNEN LIEGENDEN FILTERS, BIS 600øC GASTEMPERATUR, L=500 MM
(1.500Gr.)
|
|
ENTNAHMEROHR AUS EDELSTAHL MIT ZWEI GEWINDEANSCHLUESSEN FUER DEN ANSCHLUSS EINES INNEN LIEGENDEN FILTERS, BIS 600øC GASTEMPERATUR, L=1.000 MM
(3.000Gr.)
|
|
ENTNAHMEROHR AUS EDELSTAHL MIT ZWEI GEWINDEANSCHLUESSEN FUER DEN ANSCHLUSS EINES INNEN LIEGENDEN FILTERS, BIS 600øC GASTEMPERATUR, L=1.500 MM
(4.500Gr.)
|
|
ENTNAHMEROHR AUS EDELSTAHL MIT ZWEI GEWINDEANSCHLUESSEN FUER DEN ANSCHLUSS EINES INNEN LIEGENDEN FILTERS, BIS 600øC GASTEMPERATUR, L=2.000 MM
(6.000Gr.)
|
|
GASENTNAHMESONDE MIT PNEUMATISCH ANGETRIEBENEM ABSPERRVENTIL, WETTERSCHUTZ- HAUBE, GEREGELTER BEHEIZUNG MIT ALARMIERUNG UND RUECKSPUEL- ANSCHLUSS UND INSTRUMENTENLUFT- VERTEILUNG, HILFSENERGIE 230 VAC, 50/60 HZ
(25.000Gr.)
|
|
GASENTNAHMESONDE MIT PNEUMATISCH ANGETRIEBENEM ABSPERRVENTIL, WETTERSCHUTZ- HAUBE, GEREGELTER BEHEIZUNG MIT ALARMIERUNG UND RUECKSPUEL- ANSCHLUSS UND INSTRUMENTENLUFT- VERTEILUNG, HILFSENERGIE 230 VAC, 50/60 HZ
(25.000Gr.)
|
|
BEHEIZTER DRUCKLUFTBEHAELTER FUER RUECKSPUELBARE GASENTNAHMESONDE, HILFSENERGIE 115-220 VAC, 50/60 HZ
(7.500Gr.)
|
|
KALIBRIERGASANSCHLUSS MIT PNEUMATISCHEM VENTIL ZUR KALIBRIERUNG ODER PLAUSIBILITAETSPRUEFUNG
(3.000Gr.)
|
|
DIAPHRAGM PUMP WITH PUMP SUSPENSION AND METAL-FREE GAS DUCTS, WITHOUT HOUSING, POWER SUPPLY 115/230 VAC, 50 HZ SWITCHABLE
(1.078Gr.)
|
|
PUMP CONTROL DEVICE AC 230V FOR DIAPHRAGM PUMP 7MB1943-3AA00
(156Gr.)
|
|
SET OF CONSUMABLE PARTS FOR DIAPHRAGM PUMP 7MB1943-3AA00
(10Gr.)
|
|
HOSE PUMP FOR THE CONTINUOUS REMOVAL OF CONDENSATE, PUMP CAPACITY 0.3 L/H, POWER SUPPLY 115/230 VAC, 50/60 HZ, SWITCHABLE
(550Gr.)
|
|
HOSE MADE OF NOVOPREN FOR HOSE PUMP
(7Gr.)
|
|
PERISTALTIC PUMP SR25.2
(58Gr.)
|
|
TUBE SET FOR PERISTALTIC PUMP SR25 WITH PVDF TUBE CONNECTION
(12Gr.)
|
|
DRIVER COMPLETE FOR PERISTALTIC PUMP SR25.1
(100Gr.)
|
|
REPLACEMENT FILTER, FIBRE GLASS, 0,3 UM
(16Gr.)
|
|
O-RING TO FILTER FPF-2/54, VITON
(2Gr.)
|
|
PELTIER GAS COOLER 1 HEAT EXCHANGER MADE OF DURAN GLASS, WITH TEMPERATURE ALARM CONTACTS POWER SUPPLY AC 50 TO 60HZ 115V
(9.100Gr.)
|
|
COMPRESSOR GAS COOLER WITH 1 HEAT EXCHANGER OF PVDF 1 PERISTALTIC PUMP FOR CONDENSATE REMOVAL AMBIENT TEMP.: +10 TO 50 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50HZ WALL MOUNTING ENCLOSURE PROTECTION CLASS: IP 20 DIMENSIONS (WXHXD): 270X270X316 MM
(15.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 1 HEAT EXCHANGER OF PVDF 1 PERISTALTIC PUMP FOR CONDENSATE REMOVAL AMBIENT TEMP.: +10 TO 50 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE PROTECTION CLASS: IP 20 DIMENSIONS (WXHXD): 270X270X316 MM
(15.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGER OF PVDF CONNECTION IN SERIES HE1 FOR PRECONDENSATION HE2 FOR CONSTANT DEW POINT 2 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL 1 FILTER WITH MOISTURE SENSOR AND ELECTRONIC CONTROLLER AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50 HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: 20, DIMENS.: 483X268X348 MM
(20.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGER OF PVDF CONNECTION IN SERIES HE1 FOR PRECONDENSATION HE2 FOR CONSTANT DEW POINT 2 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL 1 FILTER WITH MOISTURE SENSOR AND ELECTRONIC CONTROLLER AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60 HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: 20, DIMENS.: 483X268X348 MM
(25.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGER OF PVDF IN PARALLEL CONNECTION 2 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL 2 FILTERS WITH MOISTURE SENSOR AND ELECTRONIC CONTROLLER AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 DIMENSIONS: (W X H X D) 483X268X348 MM
(25.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 3 HEAT EXCHANGER OF PVDF IN PARALLEL CONNECTION 3 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 DIMENSIONS (WXHXP): 483X268X348 MM
(24.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 3 HEAT EXCHANGER OF PVDF IN PARALLEL CONNECTION 3 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 DIMENSIONS (WXHXP): 483X268X348 MM
(24.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 4 HEAT EXCHANGER OF PVDF 4 PERIALISTIC PUMPS FOR CONDENSATE REMOVAL AMBIENT TEMP.: +5 TO 45 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 DIMENSIONS(WXHXD): 483X360X406 MM
(32.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 4 HEAT EXCHANGER OF PVDF 4 PERIALISTIC PUMPS FOR CONDENSATE REMOVAL AMBIENT TEMP.: +5 TO 45 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 DIMENSIONS(WXHXD): 483X360X406 MM
(32.000Gr.)
|
|
EXPLOSION PROTECTED COMPRESSOR GAS COOLER WITH 1 HEAT EXCHANGER OF SS AMBIENT TEMP.: +5 TO 45 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50 HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 EX-APPROVAL (ATEX): II 2G EEX PEDQ (IB) IIC T4 DIMENSIONS (WXHXD): 483X360X450 MM
(40.000Gr.)
|
|
EXPLOSION PROTECTED COMPRESSOR GAS COOLER WITH 1 HEAT EXCHANGER OF SS AMBIENT TEMP.: +5 TO 45 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 EX-APPROVAL (ATEX): II 2G EEX PEDQ (IB) IIC T4 DIMENSIONS (WXHXD): 483X360X450 MM
(40.000Gr.)
|
|
EXPLOSION PROTECTED COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGERS OF SS AMBIENT TEMP.: +5 TO 45DEGC GAS OUTLET DEW POINT: +5DEGC POWER SUPPLY: 230 V AC,50HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19INCH INSTALLATION PROTECTION CLASS: IP 20 EX-APPROVAL (ATEX): II 2G EEX PEDQ (IB) IIC T4 DIMENSIONS (WXHXD): 483X360X450 MM
(42.000Gr.)
|
|
EXPLOSION PROTECTED COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGERS OF SS AMBIENT TEMP.: +5 TO 45 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 115 V AC, 60HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: IP 20 EX-APPROVAL (ATEX): II 2G EEX PEDQ (IB) IIC T4 DIMENSIONS (WXHXD): 483X360X450 MM
(40.000Gr.)
|
|
COMPRESSOR GAS COOLER WITH 2 HEAT EXCHANGER OF PVDF IN PARALLEL CONNECTION 2 PERISTALTIC PUMPS FOR CONDENSATE REMOVAL 2 FILTERS WITH MOISTURE SENSOR AND ELECTRONIC CONTROLLER AMBIENT TEMP.: +10 TO 40 DEG C GAS OUTLET DEW POINT: +5 DEG C POWER SUPPLY: 230 V AC, 50HZ WALL MOUNTING ENCLOSURE OR HOUSING FOR 19 INSTALLATION PROTECTION CLASS: 20 DIMENSIONS: (W X H X D) 483X268X348 MM
(24.000Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, TURNED TO BELOW, ADJUSTABLE FLOW RATE UP TO MAX. 400 L/H UNDER NORMATIVE COND. VIA BUILT-IN BYPASS VALVE POWER SUPPLY 230V 50/60 HZ WITH MOUNTING SUPPORT
(5.638Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP POWER SUPPLY AC 50/60HZ 115V; 1.6A, ADJUSTABLE VIA BUILT-IN BYPASS VALVE DEGREE OF PROTECTION IP 54 WITH PUMP SUSPENSSION
(8.063Gr.)
|
|
VALVES FOR SAMPLE GAS PUMP (2 VALVES REQUIRED) MATERIAL: PTFE/PVDF
(2Gr.)
|
|
ERSATZTEIL: FALTENBALG FUER KORROSSIONSFESTE MESSGASPUMPE
(100Gr.)
|
|
ECCENTRIC AND CONNECTING ROD WITH BALL BEARING
(670Gr.)
|
|
KIT OF 2 VALVES MATERIAL: PTFE/PEEK
(4Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, TURNED TO BELOW, ADJUSTABLE FLOW RATE UP TO MAX. 400 L/H UNDER NORMATIVE COND. VIA BUILT-IN BYPASS VALVE POWER SUPPLY 115V 50/60 HZ WITH MOUNTING SUPPORT
(8.000Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, WITH ADAPTER FLANGE PUMP WITHOUT BYPASS VALVE MAX. FLOW RATE 400 L/H NOT ADJUSTABLE POWER SUPPLY 230V 50/60 HZ
(6.964Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, WITH ADAPTER FLANGE PUMP WITHOUT BYPASS VALVE MAX. FLOW RATE 400 L/H NOT ADJUSTABLE POWER SUPPLY 115V 50/60 HZ
(5.638Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, ATEX CERTIFIED FOR EX-ZONE 1 ADJUSTABLE FLOW RATE UP TO MAX. 400 L/H UNDER NORMATIVE COND. VIA BUILT-IN BYPASS VALVE POWER SUPPLY 230V 50/60 HZ WITH MOUNTING SUPPORT
(7.211Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, ATEX CERTIFIED FOR EX-ZONE 1 ADJUSTABLE FLOW RATE UP TO MAX. 400 L/H UNDER NORMATIVE COND. VIA BUILT-IN BYPASS VALVE POWER SUPPLY 115V 50/60 HZ WITH MOUNTING SUPPORT
(7.211Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, WITH ADAPTER FLANGE ATEX CERTIFIED FOR EX-ZONE 1 PUMP WITHOUT BYPASS VALVE MAX. FLOW RATE 400 L/H NOT ADJUSTABLE POWER SUPPLY 230V 50/60 HZ
(8.500Gr.)
|
|
CORROSION-RESISTANT SAMPLE GAS PUMP BELLOW PUMP, BELLOW MADE OF PTFE, WITH ADAPTER FLANGE ATEX CERTIFIED FOR EX-ZONE 1 PUMP WITHOUT BYPASS VALVE MAX. FLOW RATE 400 L/H NOT ADJUSTABLE POWER SUPPLY 115V 50/60 HZ
(8.500Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 230 V, 50 HZ
(5.600Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 220 V, 60 HZ
(5.600Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 115 V, 60 HZ
(5.600Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, EXPLOSIONSGESCHUETZTE AUSFUEHRUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 230 V, 50 HZ
(5.600Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, EXPLOSIONSGESCHUETZTE AUSFUEHRUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 220 V, 60 HZ
(5.600Gr.)
|
|
KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG, EXPLOSIONSGESCHUETZTE AUSFUEHRUNG, SCHUTZART IP44, MIT PUMPENHALTERUNG, HILFSENERGIE AC 115 V, 60 HZ
(5.600Gr.)
|
|
ERSATZ-MEMBRANE FUER KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG
(50Gr.)
|
|
ERSATZ-VENTILPLATTE FUER KORROSIONSFESTE MESSGASPUMPE MIT HOHER FOERDERLEISTUNG
(0Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, CO MORE THAN 10VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM . UN1956
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, NO MORE THAN 100VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM . UN1956
(15.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, NO MORE THAN 20 VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, SO2 MORE THAN 100 VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, SO2 MORE THAN 10 VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, 02 LESS THAN 21% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___% . ******** UN1956 ********
(17.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, CO2 LESS THAN 17% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___% . UN1956
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, CO2 MORE THAN 17% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, H2 (VOL. PERCENT) CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, SF6 MORE THAN 6,3% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, NO MORE THAN 100 VPM CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___%
(15.115Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, CO2 LESS THAN 17% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS, CO MORE THAN 10VPM CO2 MORE THAN 17% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L-BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, SO2 MORE THAN 100 VPM CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, SO2 MORE THAN 10 VPM CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, SO2 THAN 100 VPM, O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS IN N2, SO2 MORE THAN 10 VPM, O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, CO2 LESS THAN 17%, O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___% CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, CO2 MORE THAN 17% O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___% CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS, CO MORE THAN 10VPM SO2 MORE THAN 100VPM O2 LESS THAN 21% CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM CO2 LESS THAN 17% H2 (VOL.%) CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___% CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, CO2 MORE THAN 17% H2 (VOL.%) CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___% CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH 3 TEST GAS COMPONENTS IN N2, CO MORE THAN 10 VPM, NO MORE THAN 100 VPM, SO2 MORE THAN 100 VPM CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 3 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT AND N2 AS THE REMAINING GAS O2 MORE THAN 21% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT AND N2 AS THE REMAINING GAS C3H8 MORE THAN 10VPM AND LESS THAN 100VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT AND N2 AS THE REMAINING GAS SF6 MORE THAN 100VPM CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH 2 TEST GAS COMPONENTS AND N2 AS THE REMAINING GAS SO2 MORE THAN 100VPM NO MORE THAN 100VPM CALIBRATION GAS CONCENTRATION 1 SPECIFY IN PLAIN TEXT ___VPM CALIBRATION GAS CONCENTRATION 2 SPECIFY IN PLAIN TEXT ___VPM
(18.000Gr.)
|
|
10-L BOTTLE WITH ONE TEST GAS COMPONENT IN N2, CH4 LESS THAN 5% CALIBRATION GAS CONCENTRATION SPECIFY IN PLAIN TEXT ___%
(18.000Gr.)
|
|
10-L BOTTLE WITH PURE H2 GAS PURITY 5.0
(18.000Gr.)
|
|
50-L BOTTLE WITH PURE H2 GAS PURITY 5.0
(80.000Gr.)
|
|
10-L BOTTLE WITH PURE N2 GAS PURITY 4.6 . ******** UN1066 ********
(16.000Gr.)
|
|
10-L BOTTLE WITH PURE N2 GAS PURITY 5.0
(18.000Gr.)
|
|
50-L BOTTLE WITH PURE N2 GAS PURITY 4.6
(80.000Gr.)
|
|
50-L BOTTLE WITH PURE N2 GAS PURITY 5.0
(80.000Gr.)
|
|
10-L BOTTLE SYNTHETIC AIR PURITY CNHM < 0.1VPM
(18.000Gr.)
|
|
50-L BOTTLE SYNTHETIC AIR PURITY CNHM <(><<)> 0.1VPM
(80.000Gr.)
|
|
50-L BOTTLE WITH PURE O2 GAS PURITY 5.0
(80.000Gr.)
|
|
SINGLE-STAGE PRESSURE REDUCER FOR N2 INLET PRESSURE MAX.200BAR OUTLET PRESSURE SET TO 3.2BAR
(1.301Gr.)
|
|
SINGEL-STAGE PRESSURE REDUCER FOR O2 INLET PRESSURE MAX.200BAR OUTLET PRESSURE SET TO 3.2BAR
(1.834Gr.)
|
|
ZRO2 OXYGEN PROBE MAX.FLUE GAS TEMPERATURE 600 GRDC
(8.200Gr.)
|
|
ZRO2 OXYGEN PROBE IN EXPLOSION-PROOF VERSION UP TO 500.C, VERSION WITH FLAME ARRESTER FILTER HEAD AND PROTECTIVE TUBE, COMPLETE, WITH CONFORMITY CERTIFICATE CENELEC EEX D II BT2, FOR ZONE 1 APPLICATIONS
(20.000Gr.)
|
|
ZRO2 OXYGEN PROBE WITH HIGH-TEMPERATURE COOLING/ PROTECTIVE TUBE FOR FLUE GAS FROM GAS FURNACES UP TO 1400 GRD DUST CONCENTRATION < 100 MG/M3
(11.000Gr.)
|
|
EVALUATION ELECTRONICS FOR ZRO2 OXYGEN PROBES
(500Gr.)
|
|
GEGENFLANSCH PASSEND ZUM SONDENFLANSCH DN65/PN6
(2.100Gr.)
|
|
EXPLOSION-PROOF EVALUATION ELECTRONICS FOR ALL ZRO2 OXYGEN PROBES (EEX D II C T6)
(1.200Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 300 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 230VAC, 50/60 HZ
(22.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 300 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 115VAC, 50/60 HZ
(22.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 300 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 230VAC, 50/60
(22.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 300 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 115VAC, 50/60
(22.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 230VAC, 50/60 HZ
(23.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 115VAC, 50/60 HZ
(23.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 230VAC, 50/60
(23.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 115VAC, 50/60
(23.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 800 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 230VAC, 50/60 HZ
(24.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 800 MM, FUER TEMPERATUREN BIS 400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 115VAC, 50/60 HZ
(24.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 800 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 230VAC, 50/60
(24.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 800 MM, FUER TEMPERATUREN BIS 400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 115VAC, 50/60
(24.100Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 1400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 230VAC, 50/60 HZ
(25.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 1400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 115VAC, 50/60 HZ
(25.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 1400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 230VAC, 50/6
(25.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 500 MM, FUER TEMPERATUREN BIS 1400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 115VAC, 50/6
(25.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 1000 MM, FUER TEMPERATUREN BIS 1400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 230VAC, 50/60 HZ
(26.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 1000 MM, FUER TEMPERATUREN BIS 1400øC, OHNE ZUSATZELEKTRONIK HILFSENERGIE 115VAC, 50/60 HZ
(26.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 1000 MM, FUER TEMPERATUREN BIS 1400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 230VAC, 50/
(26.900Gr.)
|
|
SAUERSTOFFANALYSENSYSTEM OXITEC ECONOMY BESTEHEND AUS ZRO2-SONDE UND ELEKTRONIK, FLANSCH AEHNLICH DN65/PN6, EINBAULAENGE 1000 MM, FUER TEMPERATUREN BIS 1400øC, MIT ZUSATZELEKTRONIK FUER 2 EINSTELLBARE GRENZWERTE UND WARTUNGSSIGNAL, HILFSENERGIE 115VAC, 50/
(26.900Gr.)
|
|
GASMONITOR TOX O2-25 FOR OXYGEN DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL TWO ELECTRODES PRINCIPLE MEAS. RANGE:0-25 VOL% O2 OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(445Gr.)
|
|
GASMONITOR TOX CO-500 FOR CARBON-MONOXIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE:0-300 PPM CO OUTPUT SIGNAL: 4 - 20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(440Gr.)
|
|
GASMONITOR TOX H2S-50 FOR HYDROGEN SULFIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE:0-50 PPM H2S OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(24.000Gr.)
|
|
GASMONITOR TOX H2S-200 FOR HYDROGEN SULFIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL MEAS. RANGE:0-100 PPM H2S OUTPUT SIGNAL: 4-20MA LINEAR THREE ELECTRODES PRINCIPLE POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(24.000Gr.)
|
|
GASMONITOR TOX CL2-20 FOR CHLORINE GAS DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-10 PPM CL2 OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(24.000Gr.)
|
|
GASMONITOR TOX H2-1000 FOR HYDROGEN GAS DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-1000 PPM H2 OUTPUT SIGNAL: 4 - 20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(24.000Gr.)
|
|
GASMONITOR TOX HCN-100 FOR HYDROGEN CYANIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-100 PPM HCN OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(470Gr.)
|
|
GASMONITOR TOX SO2-20 FOR SULPHUR DIOXIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-20 PPM SO2 OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(400Gr.)
|
|
GASMONITOR TOX SO2-100 FOR SULPHUR DIOXIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-100 PPM SO2 OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(400Gr.)
|
|
GASMONITOR HC66 SENSOR FOR MONITORING OF LEL OF FLAMMABLE GASES AND VAPORS IN NON-POTENTIALLY EXPLOSIVE ATMOSPHERES; MEASURING RANGE: 0 TO 100LEL MEASURING PRINCIPLE: CATALYTIC COMBUSTION OUTPUT SIGNAL: 4-20MA, LINEAR ONE-MAN CALIBRATION HOUSING FOR WALL MOUNTING THREE-WIRE SYSTEM: 24V DC, 4-20MA, GROUND. POWER SUPPLY FROM THE EVALUATION UNIT 8022 (SEPARATE ORDER NO)
(614Gr.)
|
|
GASMONITOR TOX NO2-20 FOR NITROGEN DIOXIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-20 PPM NO2 OUTPUT SIGNAL: 4 - 20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(400Gr.)
|
|
GASMONITOR TOX NH3-200 FOR AMMONIA DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-200 PPM NH3 OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(400Gr.)
|
|
GASMONITOR TOX NO-100 FOR NITROGEN MONOXIDE DETECTION, FOR USE IN GENERAL PURPOSE CLASSIFIED AREAS MEASURING PRINCIPLE: ELECTROCHEMICAL CELL THREE ELECTRODES PRINCIPLE MEAS. RANGE: 0-100 PPM NO OUTPUT SIGNAL: 4-20MA LINEAR POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(400Gr.)
|
|
EXDETECTOR HC-100 MESSGASFUEHLER ZUR UEG-ERFASSUNG VON EXPLOSIONSFAEHIGEN GASEN IN EX-BEREICHEN DER ZONEN 1 UND 2, MESSBEREICH: 0 BIS 100% UEG LINEARES MESSSIGNAL: 4-20 MA DREILEITERTECHNIK 24VDC, 4-20MA HILFSENERGIE AUS DER AUSWERTEELEKTRONIK
(1.300Gr.)
|
|
LEL EXMONITOR HC 100-M FOR HYDROGEN DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR HYDROGEN (H2) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR METHANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR METHANE (CH4) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR ETHANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ETHANE (C2H6) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR PROPANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR PROPANE (C3H8) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR BUTANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR BUTANE (C4H10) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR N-PENTANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-PENTANE (C5H12) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR N-HEXANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-HEXANE (C6H14) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR N-HEPTANE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-HEPTANE (C7H16) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR ETHYLENE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ETHYLENE (C2H4) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 100-M FOR ACETYLENE DETECTION FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ACETYLENE (C2H2) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL GAS DETECTOR MODEL EXDETECTOR HC 100-M PRIMARY FACTORY CALIBRATION FOR ANOTHER COMBUSTIBLE GAS FOR USE IN HAZARDOUS AREAS ZONE 1 AND 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% UEG OUTPUT SIGNAL: 4-20MA AMBIENT TEMPERATURE RANGE: FROM -20 TO +55 DEG C DEGREE OF PROTECTION: IP 54 MEASURING PRINCIPLE: CATALYTIC COMBUSTION SUPPLY VOLTAGE: DC 24 V FROM EVALUATION UNIT 8022. INFORM ABOUT CALIBRATION GAS.
(1.563Gr.)
|
|
CALIBRATIONBOX-I ZUR BEDIENUNG UND JUSTIERUNG VON MESSGASFUEHLERN TYP EXDETECTOR HC-100, ZUM EINSATZ IN EXPLOSIONSGEFAEHRDETEN BEREICHEN DER ZONEN 1 UND 2, DC 6V BATTERIEVERSORGUNG
(660Gr.)
|
|
LEL EXMONITOR HC 150-M FOR HYDROGEN DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR HYDROGEN (H2) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR METHANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR METHANE (CH4) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR ETHANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ETHANE (C2H6) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR PROPANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR PROPANE (C3H8) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR BUTANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR BUTANE (C4H10) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR N-PENTANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-PENTANE (C5H12) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR N-HEXANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-HEXANE (C6H14) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR N-HEPTANE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR N-HEPTANE (C7H16) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR ETHYLENE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ETHYLENE (C2H4) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR ACETYLENE DETECTION FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR ACETYLENE (C2H2) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
LEL EXMONITOR HC 150-M FOR USE IN HAZARDOUS AREA ZONE 2 ACCORD. TO ATEX MEASURING RANGE: 0-100% LEL INITIAL FACTORY CALIBRATION FOR OTHER TYPE OF GAS (TO BE SPECIFIED IN PURCHASE ORDER) OUTPUT SIGNAL: 4-20MA LINEAR MEASURING PRINCIPLE: CATALYTIC COMBUSTION (HEAT OF REACTION MEASURING) POWER SUPPLY 24V DC, POWER FEED FROM EVALUATION UNIT 8022 (ADDITIONAL PURCHASE REQUEST) HOUSING MATERIAL: ALUMINIUM, PROTECTION RATING: IP54
(1.563Gr.)
|
|
PRESET IN FACTORY TO DESIRED GAS CONCENTRATION (ONLY FOR LEL SENSOR)
(1Gr.)
|
|
EVALUATION UNIT, TYPE 8022 FOR MEASUREMENT AND DISPLAY OF GAS CONCENTRATION OF CONNECTED 4...20 MA GAS DETECTORS NUMBER OF CONNECTABLE SENSORS:2 TWO ALARM THRESHOLD VALUES ADJUSTABLE PER SENSOR; 4 OUTPUTS RELAYS: ALARM, HORN, FAULT; DISPLAY AND CONTROLS BUTTONS; HOUSING: PLASTIC FOR WALL OR RAIL MOUNTING MOUNTING POWER SUPPLY: 210-250VAC, 50-60HZ, 20VA OR 24V DC
(948Gr.)
|
|
EVALUATION UNIT, TYPE 8022 110V MEASUREMENT AND DISPLAY OF GAS CONCENTRATION OF CONNECTED 4...20 MA GAS DETECTORS NUMBER OF CONNECTABLE SENSORS:2 TWO ALARM THRESHOLD VALUES ADJUSTABLE PER SENSOR; 4 OUTPUTS RELAYS: ALARM, HORN, FAULT; DISPLAY AND CONTROLS BUTTONS; HOUSING: PLASTIC FOR WALL OR RAIL MOUNTING MOUNTING POWER SUPPLY: 110-115VAC, 50-60HZ, 20VA OR 24V DC
(500Gr.)
|
|
EMERGENCY POWER SUPPLY NV24 WITH CHARGER AND 2 ACCUS 12V/2.2AH FOR SUPPLY OF 8022 EVALUATION UNITS WITH 24V DC EMERGENCY SUPPLY POWER SUPPLY: 230V AC OUTPUT: 24V DC; HOUSING FOR RAIL MOUNTING 35MM
(14.000Gr.)
|
|
EMERGENCY POWER SUPPLY NV24/110 WITH CHARGER AND 2 ACCUS 12V/2.2AH FOR SUPPLY OF 8022 EVALUATION UNITS WITH 24V DC EMERGENCY SUPPLY POWER SUPPLY: 110V AC OUTPUT: 24V DC; HOUSING FOR RAIL MOUNTING 35MM
(752Gr.)
|
|
MINIATURE FIELD DISTRIBUTOR KFV1 TO ACCOMMODATE ONE 8022 EVALUATION UNIT, INCLUDING INSTALLATION AND WIRING; PROTECTION RATING: IP54 DIMENSIONS: 180X254X110MM
(1.500Gr.)
|
|
MINIATURE FIELD DISTRIBUTOR KFV2 TO ACCOMMODATE TWO 8022 EVALUATION UNIT, INCLUDING INSTALLATION AND WIRING; PROTECTION RATING: IP54 DIMENSIONS: 360X254X110MM
(2.500Gr.)
|
|
REPLACEMENT ACCU RATED VOLTAGE 12V, CAPACITY 2.2AH, FOR EMERGENCY SUPPLY UNIT NV24; TWO ITEMS ARE REQUIRED FOR 24VDC
(200Gr.)
|
|
ALARM HORN FOR INDOOR AND OUTDOOR INSTAL. WITH MOUTH PIECE, 110 DB(A) HOUSING MADE OFF ABS, GRAY 230 V AC 0.1A
(1.100Gr.)
|
|
ALARM HORN IP 55 FOR INDOOR AND OUTDOOR INSTAL. WITH MOUTH PIECE, 110 DB(A) HOUSING MADE OFF ABS, GRAY 24V DC 0.45 A
(1.100Gr.)
|
|
FLASHING LAMP IP 54 CAP COLOR RED FOR INDOOR AND SHELTERED OUTDOOR INSTALLATION THERMOPLAST HOUSING FLASH ENERGY 5 JOULES 230V AC 0.09A
(401Gr.)
|
|
FLASHING LAMP IP 54 CAP COLOR RED FOR INDOOR AND SHELTERED OUTDOOR INSTALLATION THERMOPLAST HOUSING FLASH ENERGY 5 JOULES 24 V DC 0.35 A
(330Gr.)
|
|
EEX-SIGNALHUPE IP 66 FUER DEN EINSATZ IN ZONE 1 UND 2 (ATEX), FUER INNEN- UND AUSSENMONTAGE, TEMPERATURBEREICH: -20...+40 øC HILFSENERGIE 230 VAC, 50 HZ
(4.600Gr.)
|
|
EEX-SIGNALHUPE IP 66 FUER DEN EINSATZ IN ZONE 1 UND 2 (ATEX), FUER INNEN- UND AUSSENMONTAGE, TEMPERATURBEREICH: -20...+40 øC HILFSENERGIE 24 VDC
(4.600Gr.)
|
|
EEX-BLTZLEUCHTE IP 66 FUER DEN EINSATZ IN ZONE 1 UND 2 (ATEX), FUER INNEN- UND AUSSENMONTAGE, GELBE KALOTTE STANDARDMAESSIG EINGEBAUT, ROTE KALOTTE LOSE BEIGELEGT, TEMPERATURBEREICH: -20...+40 øC HILFSENERGIE 230 VAC, 0.2 A
(5.600Gr.)
|
|
EEX-BLTZLEUCHTE IP 66 FUER DEN EINSATZ IN ZONE 1 UND 2 (ATEX), FUER INNEN- UND AUSSENMONTAGE, GELBE KALOTTE STANDARDMAESSIG EINGEBAUT, ROTE KALOTTE LOSE BEIGELEGT, TEMPERATURBEREICH: -20...+40 øC HILFSENERGIE 24 VDC, 1 A
(5.600Gr.)
|
|
EXMONITOR TOX O2-25 GAS DETECTOR FOR OXYGEN DEFICIENCY, VERSION FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384 MEASURING PRINCIPLE: ELECTROCHEM. CELL; MEASURING RANGE: 0-25% VOL O2 LINEAR OUTPUT SIGNAL 4-20MA TWO-WIRE-SYSTEM 24V DC; POWER SUPPLY FROM EVALUATION UNIT 8022 HOUSING MATERIAL: GRP IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(24.000Gr.)
|
|
EXMONITOR TOX CO-1000 GAS DETECTOR FOR CARBON MONOXIDE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-300PPM CO OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.296Gr.)
|
|
EXMONITOR TOX H2S-50 GAS DETECTOR FOR HYDROGEN SULFIDE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-50PPM H2S OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(15.000Gr.)
|
|
EXMONITOR TOX H2S-100 GAS DETECTOR FOR HYDROGEN SULFIDE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-100PPM H2S OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(24.000Gr.)
|
|
EXMONITOR TOX CL2-20 GAS DETECTOR FOR CHLORINE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-10PPM CL2 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(24.000Gr.)
|
|
EXMONITOR TOX H2-1000 GAS DETECTOR FOR HYDROGEN, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-1000PPM H2 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(24.000Gr.)
|
|
EXMONITOR TOX HCN-100 GAS DETECTOR FOR HYDROGEN CYANIDE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-100PPM HCN OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(24.000Gr.)
|
|
EXMONITOR TOX CL2-20 GAS DETECTOR FOR CHLORINE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-10PPM CL2 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.200Gr.)
|
|
EXMONITOR TOX SO2-100 GAS DETECTOR FOR SULPHUR DIOXIDE, FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-100PPM SO2 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.200Gr.)
|
|
EXMONITOR TOX NO-100 GAS DETECTOR FOR NITROGEN MONOXIDE FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-100PPM NO OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.200Gr.)
|
|
EXMONITOR TOX NO2-20 GAS DETECTOR FOR NITROGEN DIOXIDE FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-20PPM NO2 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.200Gr.)
|
|
EXMONITOR TOX NH3-200 GAS DETECTOR FOR AMMONIA FOR USE IN HAZARDOUS AREA ZONE 1 ACCORD. TO ATEX; II 2G EEX IA IIC T4 AND BVS 03 ATEX E 384; MEASURING PRINCIPLE: ELECTROCHEMICAL CELL WITH THREE ELECTRODES. MEASURING RANGE: 0-200PPM NH3 OUTPUT SIGNAL: 4-20MA, LINEAR TWO-WIRE-SYSTEM: 24V DC POWER SUPPLY FROM EVALUATION UNIT 8022; HOUSING MATERIAL: GRP- POLYESTER; IP54; RECOMMENDED BARRIERS: ELECTRICAL ISOLATING AMPLIFIER
(1.200Gr.)
|
|
CALIBRATION SET IN ALUMINIUM CASE CONTAINING: 1 ALUMINIUM CASE, 1 GOVERNOR (CHECK VALVE, FLOW METER), 1 HOSE, 1 PNEUMATIC COUPLING, 1 CABLE FOR FRONT PANEL MEASURING SOCKETS,SPACE FOR 2 CAL. GAS CYLINDERS (TO ORDERED SEPARATELY!)
(2.775Gr.)
|
|
MINICAN CALIB. GAS CYLINDER O2 ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF SYNTHETIC AIR THE WITH CALIBRATION COMPONENT CONCENTRATION OF 20VOL% OXYGEN
(260Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR CO ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT CO WITH A CONCENTRATION OF 300PPM BALANCED IN NITROGEN
(357Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR H2 ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT H2 WITH A CONCENTRATION OF 1.6VOL.% CORRESPONDING TO 40% LEL. BALANCED IN NITROGEN
(260Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR CH4 ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT CH4 WITH A CONCENTRATION OF 1.76VOL.% CORRESPONDING TO 40% LEL. BALANCED IN NITROGEN
(260Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR C3H8, ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT C3H8 WITH A CONCENTRATION OF 0.68VOL.% CORRESPONDING TO 48% LEL. BALANCED IN NITROGEN ************************ UN 1950 AEROSOL, NON-FLAMMABLE ************************
(364Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR C4H10, ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT C4H10 WITH A CONCENTRATION OF 0.56VOL.% CORRESPONDING TO 40% LEL. BALANCED IN NITROGEN
(260Gr.)
|
|
MINICAN CALIB. GAS CYLINDER FOR NH3, ALUMINIUM, NON-RETURNABLE CYLINDER WITH 1 LITTER CONTENT. GAS MIXTURE CONSISTING OF THE CALIBRATION COMPONENT NH3 WITH A CONCENTRATION OF 500PPM BALANCED IN NITROGEN
(260Gr.)
|
|
STAUBKONZENTRATIONSMESSGERAET D-R 290 FUER MESSSTRECKEN BIS 2,25 M, BESTEHEND AUS 1 MESSKOPF MIT 2 M ANSCHLUSSKABEL, 1 REFLEKTOR, 2 EINSCHWEISSROHRE MIT JUSTIERFLANSCH, 1 BEDIENEINHEIT IM WANDGEHAEUSE, 1 GEBLAESE 1-PHASIG 115/230 VAC, 50/60 HZ, SCHLAUCHLAE
(36.000Gr.)
|
|
STAUBKONZENTRATIONSMESSGERAET D-R 290 FUER MESSSTRECKEN BIS 12 M, BESTEHEND AUS 1 MESSKOPF MIT 2 M ANSCHLUSSKABEL, 1 REFLEKTOR, 2 EINSCHWEISSROHRE MIT JUSTIERFLANSCH, 1 BEDIENEINHEIT IM WANDGEHAEUSE, 1 GEBLAESE 1-PHASIG 115/230 VAC, 50/60 HZ, SCHLAUCHLAENG
(36.000Gr.)
|
|
SCHNELLSCHLUSSKLAPPE D-SK 290 KOMPLETT ZUBEHOER D-R-290
(6.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER MESSKOPF ZUBEHOER D-R-290
(8.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER REFLEKTOR ZUBEHOER D-R-290
(6.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER GEBLAESE ZUBEHOER D-R-290
(6.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER BEDIENEINHEIT ZUBEHOER D-R-290
(5.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER SCHNELLSCHLUSSKLAPPE ZUBEHOER D-R-290
(3.000Gr.)
|
|
5 M VERLAENGERUNG FUER VERBINDUNGSKABEL ZUBEHOER D-R-290
(2.000Gr.)
|
|
10 M VERLAENGERUNG FUER VERBINDUNGSKABEL ZUBEHOER D-R-290
(4.000Gr.)
|
|
ANSCHLUSSBOX FUER GROSSE VERLAENGERUNGEN ZUBEHOER D-R-290
(3.000Gr.)
|
|
RAUCHFREIE MESSSTRECKE BIS 2 M ZUBEHOER D-R-290
(20.000Gr.)
|
|
RAUCHFREIE MESSSTRECKE BIS 3 M ZUBEHOER D-R-290
(30.000Gr.)
|
|
RAUCHFREIE MESSSTRECKE BIS 4.5 M ZUBEHOER D-R-290
(45.000Gr.)
|
|
JUSTIEREINRICHTUNG D-R 280-70 ZUBEHOER D-R-290
(8.000Gr.)
|
|
KONTROLLGERAET D-R 280-80 ZUBEHOER D-R-290
(12.000Gr.)
|
|
EINSCHWEISSROHRE IN EDELSTAHLAUSFUEHRUNG OPTION D-R-290
(3.000Gr.)
|
|
SONDERLAENGE EINSCHWEISSROHRE OPTION D-R-290
(4.000Gr.)
|
|
EINSCHWEISSROHRE IN EDELSTAHLAUSFUEHRUNG UND SONDERLAENGE OPTION D-R-290
(4.000Gr.)
|
|
TESTFILTER ZUBEHOER D-R-290
(500Gr.)
|
|
FILTERPATRONE VERBRAUCHSTEIL D-R-290
(500Gr.)
|
|
GEBLAESEEINRICHTUNG 1-PHASIG 115/230 VAC, 50/60 HZ, SCHLAUCHLAENGE 10 M ERSATZTEIL D-R-290
(20.000Gr.)
|
|
SPUELLUFTSCHLAUCH 1 METER ERSATZTEIL D-R-290
(500Gr.)
|
|
SUPERBREITBANDDIODE ERSATZTEIL D-R-290
(200Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-290 ENGLISCH
(300Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-290 DEUTSCH
(300Gr.)
|
|
RUSSZAHLMESSGERAET D-R 300 BESTEHEND AUS 1 SENDE/EMPFANGSEINHEIT IN 230 VAC, 50 HZ, 1 BEDIENDISPLAY/ANSCHLUSSKASTEN 1 ANBAUFLANSCH IN ST 37, 2 LICHTFALLEN IN ST 37, 1 GEBLAESE 1-PHASIG 115/230 VAC 50/60 HZ, SCHLAUCHLAENGE 3 M
(60.000Gr.)
|
|
STAUBKONZENTRATIONSMESSGERAET D-R 300-40 BESTEHEND AUS 1 SENDE/EMPFANGSEINHEIT IN 230 VAC, 50 HZ, 1 BEDIENDISPLAY/ANSCHLUSSKASTEN 1 ANBAUFLANSCH IN ST 37, 2 LICHTFALLEN IN ST 37, 1 GEBLAESE 1-PHASIG 115/230 VAC 50/60 HZ, SCHLAUCHLAENGE 3 M
(52.000Gr.)
|
|
HOCHTEMPERATUR- AUSFUEHRUNG D-R-300 FUER MAX. 600øC MESSKOPFKUEHLUNG BESTEHEND AUS GEBLAESE UND KUEHLHAUBE
(8.000Gr.)
|
|
HOCHTEMPERATUR- AUSFUEHRUNG D-R-300 FUER MAX. 600øC ZUSATZGEBLAESE FUER DIE REDUNDANTE AUSFUEHRUNG DES SPUELLUFT- ODER KUEHLGEBLAESES MIT UMSCHALTELEKTRONIK
(20.000Gr.)
|
|
SCHNELLSCHLUSSKLAPPE D-SK 310 KOMPLETT ZUBEHOER D-R-300
(10.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER S/E-EINHEIT VERTIKAL ZUBEHOER D-R-300
(15.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER S/E-EINHEIT HORIZONTAL ZUBEHOER D-R-300
(15.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER GEBLAESE ZUBEHOER D-R-300
(6.000Gr.)
|
|
WETTERSCHUTZHAUBE FUER BEDIENGERAET ZUBEHOER D-R-300
(3.000Gr.)
|
|
JUSTIEREINRICHTUNG ZUM EINSCHWEISSEN VON FLANSCH UND LICHTFALLE ZUBEHOER D-R-300
(6.000Gr.)
|
|
KONTROLLGERAET ZUR KONTROLLE DER LINEARITAET ZUBEHOER D-R-300
(26.000Gr.)
|
|
FLANSCH UND LICHTFALLE IN EDELSTAHLAUSFUEHRUNG OPTION D-R-300-40
(8.000Gr.)
|
|
FLANSCH UND LICHTFALLE IN EDELSTAHLAUSFUEHRUNG OPTION D-R-300
(16.000Gr.)
|
|
AUTOMATISCHE MESSBEREICHS- UMSCHALTUNG UND 2. MESSWERT- AUSGANG FUER 17. BIMSCHV OPTION D-R-300
(0Gr.)
|
|
ZUSAETZLICHE HALAR-BESCHICHTUNG DES GERAETEUNTERTEILS OPTION D-R-300
(0Gr.)
|
|
SELBSTREGULIERENDE BEHEIZUNG DES GERAETEUNTERTEILS OPTION D-R-300
(6.000Gr.)
|
|
1.5 M BEHEIZTER SPUELLUFTSCHLAUCH ZUBEHOER D-R-300
(4.000Gr.)
|
|
SENDELAMPE VERBRAUCHSTEIL D-R-300
(200Gr.)
|
|
ERSATZFILTERPATRONE VERBRAUCHSTEIL D-R-300
(500Gr.)
|
|
GEBLAESEEINRICHTUNG ERSATZTEIL D-R-300
(20.000Gr.)
|
|
SPUELLUFTSCHLAUCH 1 METER ERSATZTEIL D-R-300
(500Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-300 IN ENGLISCH
(300Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-300 IN DEUTSCH
(300Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-300-40 IN ENGLISCH
(300Gr.)
|
|
BEDIENUNGSANLEITUNG D-R-300-40 IN DEUTSCH
(300Gr.)
|
|
KOMBINATIONSSONDE D-RX-250 BESTEHEND AUS 1 ZWEIKAMMERDURCHFLUSSSONDE, 1 MONTAGEFLANSCH, 1 DIFFERENZDRUCKUMFORMER, 2M ANSCHLUSSLEITUNG, 1 TRANSMITTER MIT ABSOLUTDRUCKSENSOR, 1 BEDIEN- UND AUSWERTEEINHEIT
(22.000Gr.)
|
|
KERAMIKEINFASSUNG FUER GASTEMPERATUR BIS 350øC ZUBEHOER D-RX-250
(1.000Gr.)
|
|
AUTOMATISCHE RUECKSPUEL- EINRICHTUNG UMSCHALTHAHN FL100UH ERFORDERLICH ANGABE ZUR HILFSENERGIE IM KLARTEXT ZUBEHOER D-RX-250
(8.000Gr.)
|
|
UMSCHALTHAHN FL100UH FUER PN 100 ZUBEHOER D-RX-250
(2.000Gr.)
|
|
GEMEINSAME WETTERSCHUTZHAUBE ZUBEHOER D-RX-250
(8.000Gr.)
|
|
WETTERSCHUTZHAUBE SONDE ZUBEHOER D-RX-250
(5.000Gr.)
|
|
10 M SCHLAUCH FUER SCHLAUCHANSCHLUSS ZUBEHOER D-RX-250
(2.000Gr.)
|
|
BEDIENUNGSANLEITUNG D-RX-250 IN ENGLISCH
(300Gr.)
|
|
BEDIENUNGSANLEITUNG D-RX-250 IN DEUTSCH
(300Gr.)
|
|
19 GAS ANALYSER RACK UNIT CALOMAT 6E, INSTALLED IN SWITCH CABINET FOR INDOOR LOCATION, +5...+35 C AMBIENT TEMPERATURE, IP 55, SHEET STEEL, 616X615X600MM (HXWXD), WITH FILTER ELEMENTS FOR ENCLOSURE VENTING AND FLAME ARRESTORS, WITHOUT SAMPLE FEEDBACK INCL.2 SET OF DOCUMENTATION
(34.000Gr.)
|
|
SAMPLE PROBE FOR CEMENT CONSISTING OF: -RETRACTION UNIT -DUST FILTER -VALVE COMBINATION WITH CONDENSATE MODULE -SAMPLE PIPE -MOUNTING MATERIAL -HEAT EXCHANGER (STANDARD 65 KW)
(800.000Gr.)
|
|
SET FIDAMAT EX STANDARD SYSTEM FOR OPERATION OF AN FIDAMAT IN A EX CERTIFIED ENVIRONMENT ACCORDING TO ATEX CATEGORY 3G (ZONE 2)
(150.000Gr.)
|
|
SET CEM 1 CONTINUOUS EMISSION MONITORING (13.BIMSCHV)
(80.000Gr.)
|
|
SET BGA, MODULAR GAS ANALYZER SOLUTION FOR BIOGENIC PROCESS GASES (BIO GAS, DIGESTER GAS, LANDFILL GAS) CONSISTING OF: - ROBUST WALL HOUSING WITH VIEW DOOR - 3-PARTS HOUSING FOR SIMPLE MAINTENANCE - SIZE (WXHXD): CA. 600X781X600 (MM) - PROTECTION: IP54 - FLAME ARRESTORS AND CONDENSATE BOEOCKER ON GAS ANALYZER INLET - GAS FLOW CONTROLER ON THE OUTLET WITH ALARM CONTACT - BASE UNIT: ULTRAMAT 23 - COMPLETELY TUBED AND ELECTRICALLY WIRED
(34Gr.)
|
|
GASMET CEMS (FTIR) CONTINUOUS EMISSION MONITORING SYSTEM INCL. GASMET FTIR ANALYZER GASMET CEMS SAMPLING SYSTEM INDUSTRIAL PC, TFT DISPLAY, KEYBOARD STANDARD ANALOG AND DIGITAL I/OS
(500Gr.)
|
|
SET CEM CERT
(80.000Gr.)
|
|
RECOMMENDED CALIBRATION GAS FOR SET BGA 10 L GAS BOTTLE, MATERIAL: ALUMINIUM; CONNECTOR: NR. 14 VA; PRESSURE: 112 BAR, STABILITY: 24 MONATE GAS MATRIX: 40 VOL-% C02 1000 MG/M3 SCHWEFELWASSERSTOFF REST: METHAN
(15Gr.)
|
|
OXYMAT 61 GAS ANALYZER 19 RACK UNIT FOR INSTALLATION IN CABINETS PRESSURE EQUIPMENT DIRECTIVE F. GAS 1/LIQUIDS 1 ART. 3.3 SEP
(14.500Gr.)
|
|
OXYMAT 6F GAS ANALYSATOR FOR WALL MOUNT UNIT PRESSURE EQUIPMENT DIRECTIVE F. GAS 1/LIQUIDS 1 ART. 3.3 SEP
(28.000Gr.)
|
|
OXYMAT 6F SPECIAL APPLICATION
(28.000Gr.)
|
|
OXYMAT 6E GAS ANALYZER 19 RACK UNIT FOR INSTALLATION IN CABINETS PRESSURE EQUIPMENT DIRECTIVE F. GAS 1/LIQUIDS 1 ART. 3.3 SEP
(14.500Gr.)
|
|
ULTRAMAT/OXYMAT 6 GAS ANALYZER 19 UNIT FOR INSTALLATION IN CABINETS PRESSURE EQUIPMENT DIRECTIVE F. GAS 1/LIQUIDS 1 ART. 3.3 SEP
(21.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER 19 UNIT FOR INSTALLATION IN CABINETS FOR COMBINED MEASUREMENT OF O2 AND IR-ACTIV COMPONENTS. PRESSURE EQUIPMENT DIRECTIVE F GAS 1/LIQUIDS 1 ART. 3.3 SEP
(21.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER 19 UNIT FOR INSTALLATION IN CABINETS FOR COMBINED MEASUREMENT OF O2 AND IR-ACTIV COMPONENTS. SPECIAL APPLICATION
(21.000Gr.)
|
|
OXYMAT 6E GAS ANALYZER 19 RACK UNIT FOR INSTALLATION IN CABINETS SPECIAL APPLICATIO
(14.500Gr.)
|
|
U6E/O6E SPECIAL APPLICATION
(21.000Gr.)
|
|
GAS ANALYZER OXYMAT 64, 19 UNIT FOR INSTALLATION IN CABINETS
(14.500Gr.)
|
|
GASANALYZER OXYMAT 64, SPECIAL APPLICATION
(14.500Gr.)
|
|
ULTRAMAT 6F GAS ANALYSATOR FOR FIELD MOUNTING
(30.000Gr.)
|
|
ULTRAMAT 6F-2R GAS ANALYSATOR FOR FIELD MOUNTING
(30.000Gr.)
|
|
ULTRAMAT 6F, SPECIAL APPLICATION, FOR FIEL MOUNTING
(30.000Gr.)
|
|
U6 2R SPECIAL APPLICATION
(30.000Gr.)
|
|
ULTRAMAT 6E GAS ANALYZER SINGLE-CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS
(15.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER DUAL-CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS
(21.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER DUAL-CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS FOR THE MEASURING OF 2-3 COMPONENTS
(30.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER DUAL-CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS FOR THE MEASURING OF 2-3 COMPONENTS SPECIAL APPLICATION
(30.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER, SPECIAL APPLICATION, 1 CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS
(15.000Gr.)
|
|
ULTRAMAT 6 GAS ANALYZER DUAL-CHANNEL 19 UNIT FOR INSTALLATION IN CABINETS SPECIAL APPLICATION
(21.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 23 ZUR MESSUNG VON 1 INFRAROT- KOMPONENTE UND SAUERSTOFF
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 23 ZUR MESSUNG VON 2 INFRAROT- KOMPONENTEN UND SAUERSTOFF
(12.000Gr.)
|
|
GASANALYSEGERAET ULTRAMAT 23 ZUR MESSUNG VON 3 INFRAROT- KOMPONENTEN UND SAUERSTOFF
(13.000Gr.)
|
|
ULTRAMAT 23 GAS ANALYZER FOR 1 COMPONENT AND OXYGEN MEASUREMENT (OPTION)
(12.000Gr.)
|
|
ULTRAMAT 23 GAS ANALYZER FOR MEASUREMENT OF 2 INFRARED COMPONENTS AND OXYGEN CONCENTR.
(12.000Gr.)
|
|
GAS ANALYZER ULTRAMAT 23 FOR MEASUREMENT OF 3 INFRARED COMPONENTS AND OXYGEN CONCENTR.
(12.000Gr.)
|
|
GAS ANALYZER ULTRAMAT 23 FOR MEASUREMENT OF 3 INFRARED COMPONENTS AND OXYGEN CONCENTR. TUEV
(12.000Gr.)
|
|
FIDAMAT 6 GAS ANALYZER 19 INCH UNIT FOR INSTALLATION IN CABINETS
(23.000Gr.)
|
|
FIDAMAT 6 GAS ANALYZER 19 INCH UNIT FOR INSTALLATION IN CABINETS SPECIAL APPLICATION
(23.000Gr.)
|
|
CALOMAT 6F GAS ANALYZER FOR FIELD MOUNTING
(30.000Gr.)
|
|
CALOMAT 6F SPECIAL APPLICATION
(30.000Gr.)
|
|
CALOMAT 6E GAS ANALYZER 19 RACK UNIT FOR INSTALLATION IN CABINETS
(14.500Gr.)
|
|
CALOMAT 6E GAS ANALYZER 19 RACK UNIT FOR INSTALLATION IN CABINETS SPECIAL APPLICATION
(14.500Gr.)
|
|
CALOMAT 62 GAS ANALYZER FOR FIELD MOUNTING
(30.000Gr.)
|
|
CALOMAT 62F, SPECIAL APPLICATION
(30.000Gr.)
|
|
CALOMAT 62 GAS ANALYZER 19 UNIT FOR INSTALLATION IN CABINETS
(14.500Gr.)
|
|
CALOMAT 62E, SPECIAL APPLICATION.
(14.500Gr.)
|
|
SIPROCESS UV600 GAS ANALYZER 19INCH RACK UNIT FOR INSTALLATION IN CABINETS FOR MEASURING 1-3 UV ACTIV COMPONENTS INCL. GAS MODULE AND BAROMETRIC PRESSURE COMPENSATION
(0Gr.)
|
|
GAS ANALYZER SIPROCESS GA700, BASEUNIT FOR INSTALATION OF MESSURING MODULES
(20.000Gr.)
|
|
OXYMAT 7 MODULE FOR OXYGEN MEASUREMENT, FOR INSTALLATION INTO BASE UNIT SIPROCESS GA700
(5.000Gr.)
|
|
LDS 6 DIODE LASER SPECTROMETER, CENTRAL UNIT,
(14.000Gr.)
|
|
LDS 6 DIODE LASER SPECTROMETER, SENSOR PAIR (CROSS DUCT)
(11.000Gr.)
|
|
IN SITU LDS 6 GAS ANALYZER SENSOR PAIR (CROSS DUCT), TYPE CD 6C
(11.000Gr.)
|
|
IN SITU LDS 6 GAS ANALYZER FLOW THROUGH SENSOR, TYPE FT 6
(11.000Gr.)
|
|
LDS 6 DIODE LASER SPECTROMETER, CENTRAL UNIT,
(19.000Gr.)
|
|
LDS 6 DIODE LASER SPECTROMETER, SENSOR PAIR (CROSS DUCT)
(25.000Gr.)
|
|
LDS6, SENSOR PAIR CD6-C
(25.000Gr.)
|
|
LDS6, SENSOR FT6
(25.000Gr.)
|
|
SITRANS SL IN-SITU GAS ANALYZER FIELD DEVICE SENSOR PAIR (CROSS DUCT) INCL. REMOTE CONTROL
(30.000Gr.)
|
|
EX-PURGING UNIT MINIPURGE FM
(3.385Gr.)
|
|
BARTEC ZONE 2 CONTROL UNIT OPERATING PRESSURE UP TO 60 MBAR
(3.380Gr.)
|
|
BARTEC EEX P STEUEREINHEIT GEM. ATEX 100 A, 230V.
(11.600Gr.)
|
|
BARTEC EEX P STEUEREINHEIT GEM. ATEX 100 A, 115V.
(1.500Gr.)
|
|
BARTEC EEX P CONTROLLING UNIT ACC. ATEX 100 A, 230 V PRESSURE REDUCER STAINLESS STEEL
(1.500Gr.)
|
|
BARTEC EEX P CONTROLLING UNIT ACC. ATEX 100 A, 115 V PRESSURE REDUCER STAINLESS STEEL
(1.500Gr.)
|
|
BARTEC ZONE 1 CONTROL UNIT LOW PRESSURE VERSION UP TO 25 MBAR, AC 230 V
(3.385Gr.)
|
|
BARTEC ZONE 1 CONTROL UNIT LOW PRESSURE VERSION UP TO 25 MBAR, AC 115 V
(3.385Gr.)
|
|
EX-TRENNVERSTAERKER
(1.000Gr.)
|
|
INTRINSICALLY SAFE ANALOG OUTPUT
(225Gr.)
|
|
RELAY OUTPUT (8), EX-PROOF
(600Gr.)
|
|
EXPLOSION PROTECTED ISOLATING RELAY, 110 V
(600Gr.)
|
|
PRESSURE SWITCH RELATIV FOR CORROSIV AND NON CORROSIV GASES
(250Gr.)
|
|
FLAME BARRIER, STAINLESS STEEL INCLUDING MOUNTING ANGLE.
(500Gr.)
|
|
FLAME BARRIER, HASTELLOY, INCLUDING MOUNTING ANGLE
(500Gr.)
|
|
FIBER OPTIC CABLE FOR LDS 6
(200Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: SENSORVERBINDUNGSKABEL FUER ALLE GASE, KABELLAENGE: STANDARDLAENGE 5M
(200Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: SENSORVERBINDUNGSKABEL FUER ALLE GASE, KABELLAENGE: STANDARDLAENGE 10M
(400Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: SENSORVERBINDUNGSKABEL FUER ALLE GASE, KABELLAENGE: STANDARDLAENGE 25M
(1.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: SENSORVERBINDUNGSKABEL FUER ALLE GASE, KABELLAENGE: STANDARDLAENGE 50M
(2.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: SENSORVERBINDUNGSKABEL FUER ALLE GASE, KABELLAENGE: STANDARDLAENGE 100M
(4.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL, NUR FUER O2 KABELLAENGE: STANDARDLAENGE 5M
(200Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL, NUR FUER O2 KABELLAENGE: STANDARDLAENGE 10M
(400Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL, NUR FUER O2 KABELLAENGE: STANDARDLAENGE 25M
(1.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL, NUR FUER O2 KABELLAENGE: STANDARDLAENGE 50M
(2.000Gr.)
|
|
FIBER OPTIC CABLE FOR LDS 6, CABLE TYPE: HYBRID CABLE, FOR O2 ONLY, CABLE LENGTH: 100M (328 FEET)
(4.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL FUER ALLE GASE (AUSSER O2), KABELLAENGE: STANDARDLAENGE 5M
(200Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL FUER ALLE GASE (AUSSER O2), KABELLAENGE: STANDARDLAENGE 10M
(400Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL FUER ALLE GASE (AUSSER O2), KABELLAENGE: STANDARDLAENGE 25M
(1.000Gr.)
|
|
GLASFASERKABEL FUER LDS 6, KABELAUSFUEHRUNG: HYBRIDKABEL FUER ALLE GASE (AUSSER O2), KABELLAENGE: STANDARDLAENGE 50M
(2.000Gr.)
|
|
FIBER OPTIC CABLE FOR LDS 6, CABLE TYPE: HYBRID CABLE, FOR ALL GASES EXCEPT O2, CABLE LENGTH: 100M (328 FEET)
(4.000Gr.)
|
|
FAT AND FACTORY CERTIFICATES FOR EXTRACTIVE GAS ANALYZERS SERIES 6 AND ULTRAMAT 23
(100Gr.)
|